Search results for: 'maxشوف'

Fluke 59 MAX+ infrared thermometer delivers fast, non-contact surface temperature readings with a 10:1 distance-to-spot ratio, laser targeting, and backlit LCD for reliable diagnostics.

Eagle Eye SG-Ultra Series digital hydrometers help match portable density and specific gravity measurement to the right configuration, from SG-Ultra routine testing to Max range, Max Plus connectivity, and Ex Petrol flammable product workflows.

Fluke Networks NFA-MMC24U-KIT UniPort Adapter Kit is designed for testing MMC 24 unpinned single-mode or multimode fiber cables with the CertiFiber™ Max Optical Loss Test Set. The kit includes pinned UniPort adapters and supporting components for fiber loss, length, and polarity measurement applications.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Fluke 113 multimeter offers fast low-impedance VCHEK testing with AC/DC voltage detection, continuity checks, a bright backlit display, and CAT IV 600 V safety rating.

The Olympus Omniscan OMNI-MX PA3218PR delivers advanced, high-speed phased array NDT with both remote control interface and multigroup support. Buy certified pre-owned from Cartoli—your trusted NDT partner. Call 18333227865 or chat live for the best deal!

Certified pre-owned Omniscan OMNI-MX PA3218PR with Remote Control Interface—combine trusted phased array ultrasonic performance with cost-effective value, mobility, and flexible remote operation.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

Fluke 64 MAX: Compact infrared thermometer with -22°F to 1112°F range, data logging, adjustable emissivity, and rugged 3-meter drop design.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

Balluff BFS 26K-PS-L01-S115 color sensor delivers reliable, high-precision color detection for automation, compatible with any PLC using 3×PNP inputs and M12 cabling.

EXFO MAX-720C-SM2-EA-RF is ready for fast 1310/1550/1625 nm SM fiber testing, pairing OTDR trace analysis with iOLM link mapping for access, FTTx/PON, LAN/WAN, and backhaul workflows.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

Fluke 62 MAX+ infrared thermometer delivers precise -30°C to 500°C readings, rugged IP54 protection, and a 3-meter drop-tested design.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

The Fluke Networks TRC-SM-VERIFY-MMC24P is a reference-grade single-mode verification test reference cord designed for testing pinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It supports verification that the test reference has been set correctly using reference-quality fiber and connectors.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

Fluke Networks TRC-SM-VERIFY-MPO16U is a reference-grade single-mode MPO16 verification cord designed for CertiFiber Max optical loss testing, ensuring accurate reference validation for unpinned MPO16 links.

Fluke Networks ADP-MPO12/24-A is an MPO APC adapter coupler designed for verification and inspection of 12 or 24 fiber MPO APC cables when used with CertiFiber Max optical loss test systems.

Snap-On Apollo D8: Quick, accurate diagnostics with an 8" touchscreen, Wi-Fi, and Intelligent Diagnostics. Boost productivity and tackle challenges with ease!

Olympus OmniScan MX PA32128PR phased array ultrasonic flaw detector with REMCTRL and MGROUP licenses. Rugged 32×128 platform for weld and corrosion inspections.

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.