Search results for: 'mila every'

Greystone - Sensor Type 12 - Pt1000-1000 ohm Platinum RTD. Immersion 100mm (4") c/w ABS utility box -requires thermowell Probe Sensors. The TE200 Series temperature sensors offer a choice of precision platinum RTD's, IC's, or NTC thermistor sensors which can be interfaced with a computerized monitoring or control system.

Schneider Electric’s remote racking Masterpact NW circuit breakers is designed is reduce the arc flash safety hazard for personnel during installation, startup and maintenance procedures. The Masterpact NW remote racking device provides maintenance personnel the ability to rack a low-voltage draw-out breaker from a remote location. This allows the personnel to be clear of the arc flash boundary area.

Inline Ratcheting Head for Low Profile Hydraulic Ratcheting Wrenches Inline IU-XL.

Inline Ratcheting Head for Low Profile Hydraulic Ratcheting Wrenches Inline IU-XL.

Inline Ratcheting Head for Low Profile Hydraulic Ratcheting Wrenches Inline IU-XL.

Fujikura FSM-50S SM MM Fiber Core Alignment Fusion Splicer w/ Cleaver CT-30 50 S

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The Flir E75-14 Thermal Imaging Camera with High-Resolution and Self-Calibrating Interchangeable 14 Degree Lenses is the newest cutting-edge thermal imaging technology from Flir, providing high sensitivity and resolution in an intuitive handheld design with high-performance features and wireless communication. Powered by a high-performance CPU, this camera delivers 320 x 240 thermal resolution that’s crystal clear, yet affordable while offering powerful functionality at no cost to you.

The Ti200 infrared camera delivers the flexibility and performance to allow you to stay on top of innovation, whether it's through industrial or commercial applications. You'll be able to spectrum analyze, detect heat and radiation level variations, or use it for industrial process control — all with wireless speed and ease. And, since it's future-ready, no matter what comes next for your business, so long as you have an infrared camera on hand, you'll be ready.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DTX-MFM2 fiber module are used with a DTX Series Cable Analyzer to test and certify fiber optic cabling installations. 

The Schneider Electric LC1 D line of contactors and overload relays offer high reliability with long mechanical and electrical life and the most complete line of accessories in the industry. They are unique from any other contactors as the 40-80 AMP contactors offer two pre-installed base mounted auxiliary contacts thus reducing the need for additional auxiliaries and in turn reducing size and complexity.

The Viavi OLS-36V2 (2334/21) SmartPocket V2 Optical Light Source is a durable and compact device used for performing insertion loss measurement and continuity checks in the field. It is designed to be user-friendly and convenient, allowing for easy and quick testing of both single mode and multimode optical fiber networks. This device is best used in conjunction with the OLP-3xV2 optical power meters, which are sold separately. The SmartPocket V2 source is equipped with Auto-λ and Multi-λ functions that work with any SmartPocket V2 power meter, allowing for a cost-effective solution for testing and troubleshooting optical fibers in the field. Its one-button operation ensures a fast, straightforward, and mistake-free testing solution, making the SmartPocket OLS-36V2 the perfect tool for daily field testing.

Megger DLRO10HD Product Overview

Product Description

Product Overview

Product Overview

Thermo Scientific Niton XL2 800 XRF is a lightweight, rugged, easy-to-use by non- technical personnel handheld instrument perfectly matched for most testing applications.  It is equipped with an integrated camera for image acquisition.  This instrument is also sealed against moisture and dust.

The 170ADO53050 is a Discrete Solid State I/O Base used in Modicon Momentum automation platform modular in design. The communication adapters and processor adapters are designed to work as functional modules when they are snapped onto a Modicon Momentum I/O base. This I/O base requires that some type of Modicon Momentum adapter be attached before it can be functional. I/O bases fit into compact standard housings that can be mounted on a DIN rail or on panels in a cabinet. It read information from field sensing devices and control discrete and analogue field actuating devices. Terminal blocks and bus bars are available for use with the bases so that this base can be used to support 2, 3 and 4-wire field devices. I/O field devices and the power supply to the module are connected via three 18-pin terminal blocks and an optional 1, 2 or 3-row busbar. This I/O base supports the rest of the control system.

The TE-6700 Seriesis attractively styled, feature-packed temperature sensing products offer ease of installation, user friendliness, and application flexibility in one package.

Introducing the first-in-its-kind dual-stage cable fault locator from megger. The EZ-Thump 3 kV and updated 4 kV single-stage cable fault locators are small, portable, lightweight, and battery-operated cable faults.