Search results for: 'wholer'

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

The Fluke CO-220 is a handheld carbon monoxide meter designed to detect and measure CO concentrations from 0 to 1000 ppm. It uses a stabilized electrochemical, gas-specific sensor and provides both numeric LCD readings and an audible beeper response. Features include MAX Hold, automatic backlight, sensor self-test, and automatic power-off.

Fluke FTP17XXPQ fused test probe set delivers secure voltage indication for three-phase power quality testing, using 11A fused probes and AC285 alligator clips designed for Fluke analyzers and loggers.

Amprobe LM-120 light meter delivers accurate auto-ranging lux and footcandle measurements using a silicon photodiode sensor, with MIN/MAX capture and data hold for lighting diagnostics.

Fluke Networks MRC-50-LCLC-0.3M-M is a multimode 50µm LC-LC test reference cord with a durable metal latch, engineered for OTDR port protection and accurate fiber certification measurements.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

Turck BI10-G30SK-RZ3X2 inductive proximity sensor with 10 mm rated switching distance. M30 threaded, flush-mount metal housing with terminal chamber connection. Supports 20–250 VAC and 10–300 VDC operation with 2-wire NC output for industrial metal detection.

The Eaton Bussmann DFJ-30 is a 30A Class J high speed, current-limiting drive fuse designed to protect AC and DC drives and power semiconductor devices. Rated up to 600 Vac and 450 Vdc, it provides very low I²t let-through energy and high interrupting capacity for demanding industrial applications.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Pomona HB-36-0 horizontal stacking banana plug patch cord delivers reliable jumper connections for test and audio devices. Features 3 ft 18 AWG cable with dual male banana plugs for standard banana jacks.

Fluke 3540 FC KIT enables three-phase power monitoring with wireless cloud streaming, harmonic analysis, and real-time condition monitoring.

Fluke V3000 FC Wireless AC voltage module measures up to 1000 V true-RMS and logs data wirelessly using Fluke Connect for real-time sharing.

Fluke 729 150G FC automatic pressure calibrator delivers hands-free pressure generation, HART communication, mA measurement, and Fluke Connect compatibility.

Fluke Networks GLD3-DSX-8000QI Gold Support delivers 3-year premium maintenance with calibration, repairs, loaner units, and 24/7 expert support.

Fluke Networks GLD-OFP-CFP-QI Gold Support provides 1-year premium maintenance with calibration, repairs, loaner units, and 24/7 expert support.

Fluke Networks OFP-Q-ADD OptiFiber Pro Add-On Kit expands Versiv systems with enterprise-grade OTDR fiber testing for data center and campus networks.

Fluke Networks 262003AL Pro3000 Tone Generator uses SmartTone technology to trace and identify cable pairs on non-active networks up to 10 miles.

Fluke BK120-107 kit combines a SmartTrace breaker finder and 107 pocket multimeter for fast circuit identification and everyday electrical troubleshooting.

Allen-Bradley 1326AB-MOD-M6-C1 is an M6 encoder mounting adapter kit designed to install an 845H encoder onto 1326AB series motors, delivering secure mechanical feedback integration in industrial motion systems.

Fluke SOL-INS87-KIT delivers complete PV testing with I-V curve tracing up to 1500V, insulation testing, clamp measurements, and multimeter diagnostics.

Allen-Bradley 800T-FXJE6A5 emergency stop pushbutton with maintained push-pull action, jumbo red E-STOP mushroom head, and dual normally closed late-break contacts for industrial safety circuits.