Search results for: 'are stock'

AEMC 2135.39 ground rod set includes two 14.5 in T-shaped auxiliary ground electrodes for use with ground testers except clamp-on models.

Eagle Eye IBEX-Extended Arm Rod Set is a 30 in. LED-lit test lead extender designed for use with IBEX-Series testers to reach battery terminals in difficult locations.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Molex 1300140037 is a 7-pole female circular connector pigtail designed for industrial electrical connections. It features a straight orientation, front panel mount configuration, and a 1/2-14 NPT mounting thread. The assembly is terminated with UL 1015 16 AWG lead wires and housed in a zinc die-cast body with black epoxy finish for durability.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

The Fireye 4-314-1 is an ultraviolet sensing tube used in Fireye flame scanner assemblies. This tube is supplied as a standalone replacement component and is identified on the original manufacturer carton for use with select 45UV series scanners. No scanner body or accessories are included.

The AMLOC 1204416-19 is a capacitance sensor assembly housed in a sealed enclosure with a rear-mounted multi-pin connector. This unit consists of the sensor electronics only and does not include a probe or external accessories. Identification and configuration are based on visible labeling and construction.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

The GE IC2956A206A is an industrial interlock snap-action contact block used as a control component within safety and machine control systems. This unit is a standalone mechanical contact block featuring a snap-action mechanism for consistent contact switching. No additional accessories or hardware are included.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

Pomona 5697-60 antenna cable delivers reliable 50 ohm BNC connectivity with gold-plated contacts and high-quality construction in a non-booted design.

Fluke Networks VERSIV-TSET Versiv Headphones deliver wired, stereo audio with in-ear comfort for clear, distraction-free listening during testing tasks.

Allen-Bradley PN-94201 is an industrial fiber optic cable designed for reliable optical signal transmission in automation environments where electrical noise immunity and stable communication are required.

Fluke INCP8 insulated linesman pliers provide 1000 V safety, aggressive serrated jaws, and a slim design for secure gripping on energized circuits.

Fluke Networks LEAD-BANA-CLP test leads feature 4 mm banana plugs and X-large alligator clips for secure connections with TS test sets.

Fluke LENS/WIDE2 wide angle infrared lens expands field of view to 46° x 34°, enabling easier thermal inspections in tight spaces with compatible cameras.

Fluke Networks DSX-CHA004 CAT 6A Channel Adapter enables accurate channel certification with DSX2-5000 CableAnalyzer systems.

Fluke Networks 10300000 modular 8-wire cords provide reliable test access for telecom lines, available in standard or rugged K-plug versions. Pack of five.

Fluke FUSE-11A/1000V B5 replacement fuses provide 11A, 1000V protection for Fluke digital multimeters, ensuring safe, reliable overcurrent protection.

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.

Fluke Networks FI1000-1.25-UTIP probe tip enables clear inspection of 1.25mm fiber connectors with the FI-1000 video probe for reliable patch cord testing.

Fluke C150 carrying case keeps your test tools organized with durable polyester, inner accessory pocket, and convenient belt loop for easy transport.

Fluke C33 Carrying Case: Keep your test equipment secure with durable vinyl exterior, interior pocket, and belt loop for easy portability.

AEMC 2129.92 Fuse Set: 12.5A, 500V fast blow fuses for Model 6240 Micro-ohmmeters. Reliable circuit protection in precision testing.