Search results for: 'provides'

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.

Hubbell HBL7593 twist-lock connector delivers secure 15A 125V power connectivity with NEMA ML-2R configuration for reliable 2-pole 3-wire grounding applications.

ABB NKTU11-14 INFI 90 Termination Loop Cable supports INFI 90 system cable connections with a loop cable format and printed 300V, 90°C, #22 AWG construction details.

GAI-Tronics 411A speaker mounting bracket assembly for wall mounting and positioning compatible speaker hardware, with bracket, adapter, conduit pipe, elbow, and gasket.

Fisher CASETW9000-HC hard case protects TW9000 utility locator systems during storage and transport. Rugged exterior with foam interior safeguards instruments from impact and damage.

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

The Fluke 53-II B is a single input digital thermometer designed for contact temperature measurement using J, K, T, E, N, R, and S thermocouples. It logs up to 500 temperature readings at user-adjustable intervals and includes a real-time clock for time-stamped data review.

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

The Fluke T5-600/62 MAX+/1AC II kit combines voltage, current, and continuity testing with infrared temperature measurement and non-contact voltage detection. The kit includes the T5-600 electrical tester, 62 MAX+ IR thermometer, and 1AC II VoltAlert tester for electrical troubleshooting and inspection tasks.

The Fluke 52 II dual probe digital thermometer measures two contact temperature inputs simultaneously using J, K, T, or E-type thermocouples. It provides laboratory accuracy, a large backlit display, and MIN, MAX, and AVG tracking for professional temperature measurement.

Fluke Networks FINDFIBER FindFiber Remote ID Source enables fast optical fiber identification when used with a SimpliFiber Pro power meter, allowing single-technician verification of fiber routing and polarity.

PLS 3R Z 3-point red self-leveling laser level delivers fast plumb reference points with ≤1/8 inch accuracy at 30 feet. Designed for precise layout with pendulum lock control.

Fluke T5-KIT accessory starter kit expands Fluke T5 electrical tester capability with SureGrip test probes, large jaw alligator clips, and a zippered soft carry case for organized field use.

Fluke INLP8 insulated long nose pliers deliver precise gripping and wire cutting with milled gripping zones and a slim jaw profile, designed for controlled work on energized electrical circuits.

Pomona 6343 Basic Electronic Test Lead Kit delivers right-angle DMM probes, extended fine tips, and alligator adapters for safe, precise electronic testing across compatible digital multimeters.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

Pomona 4408 test lead holder provides durable steel organization for RG 59 and RG 108 cables. Designed for lab and bench use, it keeps test leads secure, visible, and easily accessible.

Pomona 5907A IEC 1010 DMM test lead kit delivers flexible, silicone-insulated 4 mm sheathed banana connections for Category III multimeter measurements with reliable contact and high safety compliance.