Search results for: '2.0'

The Fluke 971 Temperature Humidity Meter is a handheld instrument for measuring air temperature, relative humidity, dew point, and wet bulb temperature. It features a backlit dual display, 99-point data storage, Min/Max/Avg functions, and a quick-response capacitance sensor for indoor air quality assessment.

Fluke T3000 FC wireless K-type temperature module delivers accurate thermocouple measurements with onboard logging and Fluke Connect compatibility for remote monitoring and data sharing.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Pomona 1756-24 Shielded Low Voltage Spade Lug Patch Cord supports precision microvolt and nanovolt measurements using gold-plated ETP copper spade lugs and a shielded 24-inch cable to minimize thermal EMF and signal interference.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

Fluke TP175E TwistGuard Test Probes provide adjustable 2mm probe tips with integrated 4mm adapters, delivering safety-rated electrical testing for multimeters while minimizing exposed metal during measurements.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

The ABB RDIO-01 is a digital I/O extension module designed for use with ABB drive systems. It provides three digital inputs and two relay outputs for expanding control and monitoring functions within compatible ABB drive architectures.

Fluke ST120+ GFCI Socket Tester with beeper verifies outlet wiring, detects common faults, and tests GFCI operation using bright LEDs and audible voltage alerts for faster, safer electrical checks.

1 x Pomona 2249-C-24 BNC Male to Male Antenna Cable (2 ft)

Pomona 2249-C-60 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Pomona 2249-C-96 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Pomona 4531-C-36 test cable converts BNC male connections to insulated alligator clips with molded strain relief for secure, versatile testing.

Fluke BP1730 rechargeable lithium-ion battery pack designed exclusively for the Fluke 1730 Energy Logger, delivering reliable portable power with OEM-approved charging and safety compliance.

Fluke 717 1000G Pressure Calibrator delivers 0–1000 PSI measurement with 0.05% accuracy and mA measurement for precise pressure calibration tasks.

Allen-Bradley 1336-CAP-SP3-A DC bus capacitor assembly designed for 460V 1336 PLUS, FORCE, and IMPACT drives. Supports stable DC bus operation in compatible 25–30 HP drive systems.

Amprobe 5XP-A compact digital multimeter with VolTect™ detection, data hold, and Magne-Grip™ holster for hands-free electrical troubleshooting.

The Fluke Networks TS52 PRO (52801001) is a telephone-test set that combines a back-lit LCD, glow-in-the-dark keypad and DataSafe Pro high-impedance monitoring with piercing-pin clip connectors—ideal for rugged outside-plant voice/data line work.

Pomona BNC cable ensures noise-free signal transfer with gold-plated contacts, PTFE insulation, and durable molded strain relief for lasting performance.

Fluke Networks TRC Fiber Optic Cord: Durable metal LC connectors for OTDR testing, 62.5 µm multimode cable ensures precise, reliable measurements.