Search results for: 'length'

For testing threaded fixings when using the M2050 Pro Tester

For testing Hex bolts when using the M2050 PRO Tester.Hydrajaws 0.41" HD Slotted Button Adaptor is a robust and durable tool designed for specialized applications. 

For M16 nuts, the bolt tester adaptor directly engages the nut in the pulling jaw.

Hook and loop cable ties are made of Nylon/P.P. They are good to use in binding cables and patch cables and will not affect the transmittance performance because of pinching caused by over tightening.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

Allen-Bradley 800T-N44 is a white 30.5 mm push-to-test pilot light color cap for Bulletin 800T and 800H operators, designed for reliable visual indication and lamp access in industrial control panels.

The Fluke Networks TS54-A-09-TDR integrates TDR, toner, pair-identifier and telecom test set in one rugged unit. Locates faults up to 3,000 ft, supports twisted pair/coax/parallel conductors and features field-ready protection for harsh environments.

The Fluke LIQ-DUO-KIT delivers a platform capable of verifying cable performance up to 10 Gb/s, analyzing network switches and PoE power, and performing Wi-Fi band/channel diagnostics. Ideal for network infrastructure contractors needing a single kit for copper verification, switch diagnostics, PoE under load, and wireless troubleshooting.

Phoenix Contact MVSTBU 2,5-5,08 delivers a reliable 2-position 5.08mm pluggable terminal block for COMBICON MSTB 2.5 headers, ideal for secure 12A wiring connections.

Appleton ST-4575 45° Liquidtight Connector delivers a secure, corrosion-resistant seal for 3/4" LFMC, ideal for wet or harsh industrial installations.

Bussmann FRS-R-35 fuse delivers reliable 35A time-delay protection for motors and panels, using Class RK5 performance for safe, efficient industrial circuit protection.

Fluke Networks Cable Analyzer DSX2-8000QI-NW – Advanced copper and fiber certifier supporting Cat 8 to 2000 MHz with Level 2G accuracy. Includes Quad OLTS for Tier-1 multimode/singlemode fiber certification. Non-wireless version of the DSX2-8000QI.

Fluke Cable Analyzer DSX2-8000QI: Advanced copper and fiber certifier supporting Cat 8 up to 2000 MHz with Level 2G accuracy. Features Quad OLTS for Tier-1 fiber certification, fast diagnostics, and LinkWare™ Live integration.