Search results for: 'battery en'

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

AEMC 6503 Hand-Cranked Megohmmeter: Reliable insulation resistance testing with 250V, 500V, 1000V test voltages and AC measurement up to 600V.

AEMC MiniFlex® MA193-10-BK — Flexible Current Sensor, Measures up to 3000AAC, Includes a compact 2.75” clamp, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series products.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

AEMC MA114 MiniFlex® 14" Rogowski Coil — Flexible AC Current Sensor for Tight Spaces, Measures Up to 3000A, CAT IV 600V Rated

AEMC 6471 Digital Ground Resistance Tester 300ft Kit offers accurate earth resistance and soil resistivity testing with auto-ranging and rechargeable battery.

The Fluke Networks FI2-7000-MPO-NW is a non-wireless FiberInspector Ultra camera optimized for MPO-12/MPO-24 connectors. It provides automated IEC pass/fail analysis, high-resolution end-face imaging and fast inspection workflows for high-density fiber environments.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

AEMC 6534 Digital Megohmmeter: Versatile insulation, voltage, resistance & continuity testing with memory, Bluetooth & backlit display.

Viavi OLS-37 Laser Source: Compact, rugged, and versatile with 1310/1490/1550 nm wavelengths. Perfect for FTTH/PON network testing with up to 80 hours of battery life.

The Fluke 810 Vibration Tester is a handheld diagnostic instrument for identifying mechanical vibration faults in rotating equipment. Using tri-axial measurement and on-device analysis, it reports fault type, location, and severity during field testing.

Amprobe LM-120 light meter delivers accurate auto-ranging lux and footcandle measurements using a silicon photodiode sensor, with MIN/MAX capture and data hold for lighting diagnostics.

Fluke T130 voltage and continuity tester delivers reliable AC/DC testing from 6–690V with LCD display and switchable load, helping electricians verify live and dead circuits safely and clearly.

Fluke 279FC/IFLEX thermal multimeter combines TRMS measurement with built-in thermal imaging, iFlex current capability, and wireless Fluke Connect reporting.

AEMC 6240 Micro-Ohmmeter: Rugged low-resistance tester with multiple test currents. 10A Kelvin clips, spring-loaded probes, and DataView software included.

Flexible Rogowski AC current sensor with 24" loop, measures up to 30,000A. Dual output 1mV/A and 0.1mV/A. Waterproof IP65 sensor, shape memory design. BNC adapter #2118.46 required for BNC input.

AEMC OX 9062 IV 60MHz is a rugged handheld 2-channel oscilloscope with 60 MHz bandwidth, a 7-inch touchscreen, FFT, power measurement, and remote control via Wi-Fi and Ethernet.

The AEMC Lightmeter Data Logger Model 1110 is a versatile and portable instrument designed mimick the human eye response and measure foot candle and lux units precisely. Perfect for workspace lighting analysis and planning, it features intuitive setup with DataView® software and a user-friendly interface for one-hand operation.

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

The AEMC OX 5042B Handscope Oscilloscope is a compact, rugged, three-in-one instrument offering oscilloscope, multimeter, and harmonic analysis capabilities all in a single handheld device. Ideal for field work and industrial environments, it delivers reliable performance with intuitive operation and a crisp color display.

AEMC 1954 Thermal IR Camera: Non-contact infrared detection with a 120x160 sensor, Bluetooth connectivity, and advanced analysis for industrial safety and diagnostics.

AEMC CM605 Clamp-on Meter measures AC/DC current up to 100A and voltage up to 600V with tapered jaws for tight spaces and auto-ranging accuracy.