Search results for: 'left'

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

Fisher TW82P-HC 82.175 kHz underground line tracer with passive power detection for locating buried pipes and cables. Digital depth, azimuth, and signal current display in weatherproof IP65 housing.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The PLS 5G is a self-leveling five-point green laser level designed for plumb, level, and square point layout. It delivers ≤1/8 in accuracy at 30 ft (≤3 mm at 10 m) and features a pendulum lock for transport and tilt mode operation. With IP54 protection and a Class 2 green beam (525 nm), the PLS 5G supports interior layout applications up to 100 ft working range.

Single SciAps LIBS argon purge canister for carbon analysis on Z-Series instruments including Z-200 C+, Z-300 Series, Z-902 Carbon, Z-903, and Z-901 Carbon. Supports precise carbon and CE testing.

ETRI 148VK0282072 axial AC fan rated 115V AC, 50/60Hz, single-phase. Zamak housing with plastic impeller (UL 94 V0) and ball bearings. Thermally protected motor. 172 × 150 × 38 mm form factor with 305 mm leads (AWG20).

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.

INNO Instrument View 8X is a single-fiber core alignment fusion splicer kit for SM, MM, DS, and NZDS fibers. It features ultrafast splice/heating cycles, a 5.0” full-touch display, automatic arc calibration, and IoT/GPS functions for tracking and device management.

Fluke Ti300 60 Hz infrared thermal imaging camera kit featuring IR-Fusion® image blending, LaserSharp® Auto Focus, 240×180 resolution, and SmartView® software.

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

INNO Instrument SCTX60 current sensor with 0-60A DC range, 60Apeak AC range, DB9 connection, 28 mm aperture, and DC-800 kHz measuring bandwidth for precision current measurement applications.

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

INNO Instrument SCTH60 current sensor with 0–60A DC range, 60Apeak AC range, 28 mm aperture, DB9 connector, and DC to 800 kHz bandwidth for precision current measurement.