Search results for: '2.0'

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

Fisher SONDE-512 transmitter emits a 512 Hz signal to trace non-metallic pipes and ducts. Designed for push-rod use, it works with line tracers to locate pipe paths and underground blockages.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

Fisher CASE-TW82HC hard case for TW-82 and TW-82P line tracers. Impact-resistant shell with custom foam protects transmitter, receiver, and accessories during transport and field use.

Fisher XLT30-B acoustic leak detector with Multi-Sensor provides precise water leak detection using adjustable filters, notch rejection, and high-sensitivity microphones for concrete, asphalt, and turf surfaces.

Fisher TW9000-CC5 is a multi-frequency underground locator for pipes and cables. It features digital signal processing, multiple locating modes, up to 32 ft depth, and includes a 5" Coupling Clamp and soft case.

The Fluke Networks LinkIQ LIQ-KIT-FMC Cable & Network Tester Kit verifies twisted pair and fiber performance up to 10GBASE-T and supports network troubleshooting. It provides frequency-based bandwidth validation, wiremap, distance to fault, IPv4/IPv6 ping, nearest switch diagnostics, and PoE testing, with RJ-45, USB, and SFP connectivity.

The Amprobe AT-6010 Advanced Wire Tracer Kit is designed to trace energized and de-energized wires, identify breakers and fuses, and locate shorts or opens. The kit includes a receiver with large LCD display and transmitter supporting operation up to 600 V AC/DC in CAT III environments.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise speed control for 3-phase induction motors, supporting 1.5kW operation on 380–500V systems with compact panel-mount design and flexible control modes.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.

Toshiba VFS11-4015PL-WN VF-S11 inverter delivers precise three-phase motor speed control with vector performance, built-in EMI filtering, and RS485 Modbus communication for industrial automation systems.

Allen-Bradley 193-EPD is an E1 Plus separate mounting adapter that enables DIN rail or panel installation of compatible electronic overload relays, improving control panel layout flexibility and thermal performance.

Allen-Bradley 800T-N40 red replacement cap for 30.5mm push-to-test pilot lights. Designed for Bulletin 800T and 800H operators to restore visibility and control identification.

Alstom ESA-700 UV flame signal analyzer for Limelight Exacta systems, providing fast flame failure detection and reliable burner monitoring in large combustion equipment using 21.6–26V AC input power.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

Fluke 1760 TR US Class-A recorder captures fast transients, harmonics, and detailed power quality data with 10 MHz bandwidth, GPS sync, and 1000 V sensors.

Fluke FLK-3000FC IND system offers wireless multimeter testing with current and voltage modules, remote monitoring, logging, and Fluke Connect integration.

Fluke FLK-3000FC HVAC kit offers wireless multimeter and clamp measurements, remote monitoring, and logging for fast HVAC troubleshooting and safer testing.

The Fluke LIQ-DUO-KIT-6PK contains six LinkIQ Duo tester kits, each capable of 10 Gb/s cable testing, network switch diagnostics, PoE verification, and Wi-Fi analysis. This bundle is suited for larger technician teams and multi-site deployments.