Search results for: 'Gattouz'

Fluke Networks GLD-DSX-602 1 Year Gold Support provides maintenance coverage for the DSX-602. Coverage includes firmware updates, software upgrades, repair services, parts replacement, annual calibration, loaner unit support, and 24x7 technical assistance through authorized service centers.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

The Fluke 53-II B is a single input digital thermometer designed for contact temperature measurement using J, K, T, E, N, R, and S thermocouples. It logs up to 500 temperature readings at user-adjustable intervals and includes a real-time clock for time-stamped data review.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

The Fluke T5-600/62 MAX+/1AC II kit combines voltage, current, and continuity testing with infrared temperature measurement and non-contact voltage detection. The kit includes the T5-600 electrical tester, 62 MAX+ IR thermometer, and 1AC II VoltAlert tester for electrical troubleshooting and inspection tasks.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

Fluke I40S-EL AC clamp-on current transformer for low current measurement up to 40 A. Designed for accurate readings on 1 A and 5 A secondary current transformers with a compact clamp profile.

Fluke 417D/62MAX+ combines a laser distance meter and IR thermometer for HVAC layout, diagnostics, and electrical troubleshooting, delivering fast distance measurement and non-contact temperature readings.

Fluke Networks FINDFIBER FindFiber Remote ID Source enables fast optical fiber identification when used with a SimpliFiber Pro power meter, allowing single-technician verification of fiber routing and polarity.

PLS 3R Z 3-point red self-leveling laser level delivers fast plumb reference points with ≤1/8 inch accuracy at 30 feet. Designed for precise layout with pendulum lock control.

Fluke GEO CABLE-REEL 50M provides a 50-meter earth ground test lead on a compact reel for grounding and earth resistance testing with Fluke GEO instruments, delivering organized cable deployment and reliable field use.

The Curtis Industries CUS8 is an 8-pin octal relay socket base designed for industrial control applications. Rated at 10A and up to 300V, it provides a standardized receptacle for compatible 2PDT octal relays or timers and supports secure screw-terminal wiring.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

The Telemotive E7150-1-B is a radio remote control receiver module used in industrial wireless control systems. It functions as the fixed receiving unit that interprets signals from a paired handheld transmitter to control machinery. The module operates as part of a Telemotive radio control system and includes diagnostic indicators for system monitoring and troubleshooting.

The PROFLO PFRCKU is a 6-inch, two-bolt pipe repair clamp designed for use on 2-inch pipe. It features a 430 stainless steel band, NBR gasket, and plated hardware, supporting a 150 psi pressure rating and a working temperature range from -30°F to 180°F.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Thea  PLS TPOD300 tripod kit provides stable mounting for PLS rotary laser levels. This heavy-duty tripod includes an angle adjustment tool and a carrying pouch.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

The Molex 1300140037 is a 7-pole female circular connector pigtail designed for industrial electrical connections. It features a straight orientation, front panel mount configuration, and a 1/2-14 NPT mounting thread. The assembly is terminated with UL 1015 16 AWG lead wires and housed in a zinc die-cast body with black epoxy finish for durability.

Thomas & Betts 17220-BD copper compression terminal lugs are designed for 3/0 AWG copper conductors and 3/8 inch studs. Manufactured from tin-plated copper, these orange Color-Keyed lugs support verified crimping with compatible dies and tools. Quantity of 10 lugs per package.