Search results for: 'it's'

Replacement Nozzle for SS-989A SOP Single 7.2x19 ID 22mm

Small Draw Stud, 3/8"-24 X 3/4"-16

Adam Equipment WBZ 15aM Washdown Scale: Waterproof, stainless retail scale with price computing. NTEP approved and perfect for food service use.

Dispenses flux evenly with a fine tipped needle.

Adam Equipment CPWplus 75M Bench & Floor Scale: Durable, versatile weighing scale for industrial, warehouse & field use. Compact design with easy-to-read LCD.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The Emerson KJ2005X1-BK1 SX Controller is designed for use within the DeltaV™ S-Series Digital Automation System. It supports hazardous area installations with ATEX, IECEx, FM, and Class I Div 2 approvals. The unit operates on +5 VDC local bus power and is specified for industrial environments from –40°C to +60°C.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The SEKAI RSC-A90 is a ruggedized color camera designed for high-resolution imaging in harsh environments. It features a 1/2" Hyper HAD CCD sensor with 470 TV lines of resolution and selectable NTSC or Y/C output. The camera supports high-speed shutter control up to 1/100,000 second, AGC on/off, and auto white balance, operating from 12 VDC.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Introducing the Autel Robotics EVO Max Gimbal Cover – your ultimate gear protector. Crafted with precision and engineered to perfection, this innovative accessory is designed to shield your EVO Max gimbal and camera lens from the rigors of travel and outdoor adventures. Say goodbye to the worry of scratches and impacts, as the EVO Max Gimbal Cover embraces your gear with a robust layer of defense. Unleash your creativity without hesitation, knowing that Autel Robotics has your equipment's safety in mind. Elevate your photography game with the EVO Max Gimbal Cover and experience worry-free exploration like never before.

Adam Equipment Latitude Compact Bench Scales LBX 12: Simple operation, precise weighing, and long-lasting performance. Perfect for production, warehouse, or field use.

The Adam Equipment BCT 660a provides efficient industrial counting and weighing. With built-in label printing, QR code and barcode options, it's ideal for inventory and production tasks.

The Adam Equipment AELP Pallet Beams with AE 403 Indicator offer precise, mobile weighing solutions for industrial and agricultural use. With adjustable beams, built-in wheels, and a 3-year warranty, it’s perfect for large-scale weighing tasks.

The 5PK-366PN-T from Eclipse Tools is a replacement tip for DP-366P.

Pro'sKit Coax Crimping Tool Kit: Precision crimping for coaxial cables. Includes frame, dies, stripper, and cutter for flawless, reliable connections. Compact & portable.