Search results for: 'Cable'

Fluke fiber optic cleaner delivers quick, reliable cleaning for SC, ST, FC, and E2000 connectors with push-action ease and durable design.

The Fluke Networks TS30 Test Set (30800009) features angled bed-of-nails (ABN) clips, high-impedance DataSafe™ monitoring for live lines, rugged DropSafe™ and RainSafe™ protection, audible ringer, tone/pulse dialing, and last-number redial—ideal for telecomm and outside-plant line work.

Fluke Networks 4-Wire In-Line Modular Adapter: Test lines without service disruption, with clear markings, angled contacts, and easy probe access.

Wohler VIS 350 PLUS L200 (8931) is a professional push-rod video inspection system with a 100 ft cable, pan & tilt camera heads, wide 7″ color display, video/photo recording, and an integrated L 200 locator — perfect for inspecting sewer, drain, duct, and ventilation lines on site.

Fisher TW82HC 82.175 kHz underground line tracer for locating buried pipes and cables. Digital depth, azimuth, and signal current display with conductive and inductive tracing modes. Hard case included.

AEMC 2151.41 is a 45 ft, 15kV black guard test lead with an integral clip designed for use with AEMC Models 6550 and 6555 insulation resistance testers, providing an extended high-voltage connection path for insulation testing applications.

Wohler 3354 electrochemical oxygen sensor for A 400 and A 400 PRO flue gas analyzers. Field-replaceable design with 0.0 to 21.0 Vol.-% O2 measurement range.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

The Fluke Networks FTK2000 SimpliFiber Pro kit is a singlemode fiber verification solution combining an optical power meter with a 1310/1550 nm laser source. It supports fast power and loss testing for installed fiber links and includes essential accessories in a portable carrying case.

Amprobe LM-200LED LED Light Meter delivers accurate lux and foot-candle measurements using a remote cosine-corrected sensor. Designed for professional LED and visible light evaluation.

Fluke T110 two-pole voltage and continuity tester delivers reliable AC/DC voltage detection with switchable load, audible and vibrating indicators, and high safety ratings for electrical verification tasks.

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

Fluke Networks MFTK-DC SM test kit enables fast MPO single-mode fiber certification at 1310/1550 nm, inspecting, cleaning, and testing all 12 fibers in seconds.

Fluke Networks OFP2-200-SI OptiFiber Pro HDR OTDR delivers fast, automated singlemode fiber testing at 1310 and 1550 nm with SmartLoop and WiFi.

Fluke Networks GLD3-DSX-8000OI Gold Support provides 3-year maintenance coverage for the DSX-8000OI, including annual calibration, factory refresh, repairs, software updates, and 24/7 technical support.

Fluke Networks GLD-DSX-ADD Gold Support delivers 1-year maintenance coverage for DSX-ADD, including software and firmware updates, calibration, repair services, and 24x7 technical support for uninterrupted testing operations.

Fluke Networks SFMULTIMODESOURCE multimode light source delivers dual-wavelength 850/1300 nm output for fast, accurate SimpliFiber Pro fiber testing.

Fluke Networks GLD3-CFP-Q-ADD provides 3-year Gold Support for the CFP-Q-ADD tester, including calibration, repairs, parts replacement, software updates, and 24/7 technical support to maintain operational reliability.