Search results for: 'Gattouz'

The Molex 1300140037 is a 7-pole female circular connector pigtail designed for industrial electrical connections. It features a straight orientation, front panel mount configuration, and a 1/2-14 NPT mounting thread. The assembly is terminated with UL 1015 16 AWG lead wires and housed in a zinc die-cast body with black epoxy finish for durability.

Thomas & Betts 17220-BD copper compression terminal lugs are designed for 3/0 AWG copper conductors and 3/8 inch studs. Manufactured from tin-plated copper, these orange Color-Keyed lugs support verified crimping with compatible dies and tools. Quantity of 10 lugs per package.

The Raco 3543-8 is a 3/4 in. 90 degree liquidtight connector with an insulated throat, designed for use with flexible metallic and Type B flexible nonmetallic liquidtight conduit in wet locations. Constructed from zinc-electroplated steel/malleable iron for corrosion protection.

Fluke MP1-MAGNET PROBE 1 magnetic probe tips provide secure hands-free contact for voltage test leads with 4 mm banana connectors, designed for Fluke 1736 and 1738 power quality analyzers.

Fluke 80PK-22 immersion temperature probe delivers reliable Type-K measurements for liquids and gels. Designed for wide temperature ranges and fast response when used with compatible thermocouple instruments.

Amprobe DL248D Deluxe Test Lead Kit delivers silicone 48-inch leads with interchangeable probes, clips, and lugs for reliable electrical testing and diagnostic flexibility across compatible measurement instruments.

Fluke TB25 tool bucket organizer delivers rigid protection and efficient storage with a waterproof hard bottom and 28 pockets. Designed to carry hand tools, meters, and test accessories securely.

Fluke 80PK-9 Type-K general purpose temperature probe designed for surface, air, and non-caustic gas measurements, offering reliable contact sensing across a wide industrial temperature range.

Fluke TP82 insulation piercing probe tips enable non-destructive testing through wire insulation. Designed for 4 mm banana leads, they support precise diagnostics on automotive sensors and wiring without stripping insulation.

Fluke T5-KIT accessory starter kit expands Fluke T5 electrical tester capability with SureGrip test probes, large jaw alligator clips, and a zippered soft carry case for organized field use.

Fluke TL28A automotive test leads provide reliable electrical access using wide-jaw alligator clips and a piercing probe. Silicone-insulated red and black leads support accurate automotive diagnostics.

Fluke 80BK-A is a Type-K thermocouple temperature probe designed for compatible digital multimeters, enabling accurate surface temperature measurements from −40°C to 260°C using standard shrouded banana inputs.

Fluke TL27 heavy duty test lead set with red and black safety-shrouded banana plugs, EPDM insulation, and CAT III 1000V rating for reliable digital multimeter and process meter testing.

Fluke TP80 electronic test probes provide insulated IC-safe probing for dense circuit boards. Designed for use with Fluke TL222 and TL224 leads, offering controlled access to compact electronic test points.

The Honeywell 620-0088 Parallel Link Driver Module is a communication module for the Honeywell IPC 620 PLC system. It supports parallel data transfer between compatible IPC 620 processors and connected system components and is used within industrial control, communication, and monitoring architectures.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Fluke Networks 10220101 is a 6-wire in-line modular adapter with K-Plug, designed for safe circuit access and line testing on active telephone networks without interrupting service.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

MSA Ultima X hydrogen sulfide gas sensor cartridge labeled for 0–50 ppm detection. Model A-ULTX-SENS-16-1-0 with software version 1.10, shown in stainless steel threaded housing with red protective cap. Designed as a replaceable sensor module for Ultima X systems.

The AMLOC 1204416-19 is a capacitance sensor assembly housed in a sealed enclosure with a rear-mounted multi-pin connector. This unit consists of the sensor electronics only and does not include a probe or external accessories. Identification and configuration are based on visible labeling and construction.