Search results for: 'rate.'

Swagelok SS-4BHT-12 is a T Series PTFE-lined stainless steel braided hose assembly with dual 1/4 in. Swagelok tube adapters. It features a 14 in. hose length with 10.2 in. live length and a temperature range of -65°F to 450°F.

The TELEMECANIQUE LA4DC1U is a suppressor module designed for use with 3P LP1D09 to LP1D32 contactors. It provides flywheel diode suppression for DC control circuits rated from 24 to 250 V DC and mounts by screws for secure installation.

The PLS 180G Z is a self-leveling green cross line laser designed for framing, acoustic ceiling installation, tile installation, and general construction layout. It projects horizontal and vertical lines with wide fan angles for interior layout applications.

The PLS 3G KIT is a self-leveling 3-point green laser level designed for fast plumb reference layout. It projects up, down, and forward points with ≤1/8 in accuracy at 30 ft and includes mounting accessories for floor, wall, and magnetic attachment applications.

The Fluke 179 True-RMS Digital Multimeter Electronics Kit supports electrical and electronic troubleshooting with voltage, current, resistance, frequency, capacitance, continuity, diode, and temperature measurements. The kit includes SureGrip accessories, a magnetic hanger, and a soft carry case for organized field use.

The Banner BA1.53SMTA is a high-temperature diffuse-mode bifurcated glass fiber optic cable with stainless steel monocoil sheathing. It features a tight right-angle side-view sensing tip, 36-inch fiber length, and 2.3 mm bundle diameter for reflective sensing applications.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

Fluke 80K-40 high voltage AC/DC test probe extends multimeter measurement capability up to 40,000V peak for low-energy CAT I circuits, delivering accurate high-voltage readings with compatible Fluke meters.

Fluke I400 AC Current Clamp Adapter enables safe, non-intrusive AC current measurement up to 400A using a digital multimeter. Compact design with 1 mA/A output and banana plug connection.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

Banner Engineering BAT2.53S is a BAT Series glass fiber optic sensor with diffuse sensing mode and a right-angle threaded sensing tip. It features a stainless steel monocoil sheath, brass sensing end, 4 mm core diameter, and 0.914 m fiber length for demanding industrial sensing environments.

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

Pomona 3542-0 insulated panel mount pin tip jacks provide secure .080 pin connections for test and measurement panels. Gold-plated brass construction supports reliable signal access in compact panel installations.

Pomona 3752 shielded miniature aluminum box with integrated BNC male-to-female connector. Designed for 50-ohm signal routing, shielding, and test circuit enclosure in RF and instrumentation setups.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The WAGO 249-117 is a gray, screwless end stop designed to secure DIN-35 rail-mounted terminal blocks. It snaps onto TS 35 x 7.5 mm or 35 x 15 mm rails without tools. Constructed from PA66 polyamide with UL94 V0 flammability rating, it provides stable positioning and electrical insulation.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

Fluke AC173 alligator clip set delivers secure electrical connections for 4 mm banana plug test leads. Designed for modular Fluke leads, it supports safe, hands-free measurements in demanding electrical environments.

The ABB RDIO-01 is a digital I/O extension module designed for use with ABB drive systems. It provides three digital inputs and two relay outputs for expanding control and monitoring functions within compatible ABB drive architectures.

Pomona 5144-48-2 SMD microtip test probe features a flexible stainless steel needle tip and 48-inch lead with stacking banana plug, designed for precise probing of surface-mount device contacts.

Fluke ST120+ GFCI Socket Tester with beeper verifies outlet wiring, detects common faults, and tests GFCI operation using bright LEDs and audible voltage alerts for faster, safer electrical checks.

Pomona 4911A-36-2 retractable sheath banana plug patch cord delivers secure 4 mm connections with insulated safety design. Ideal for electrical test setups requiring flexible 36-inch leads.

Pomona 5830-0 Flexible Maxigrabber Test Clip delivers secure electrical testing with a rotating pincer contact and standard banana jack termination. Designed for custom leads using 18–22 AWG wire.