Search results for: 'taxable for'

Fluke JackRapid tool: Terminate jacks 8x faster with precision. One-handed squeeze action with built-in blade for accurate, effortless cable termination.

Fluke Networks MicroScanner2 Kit verifies network cables fast with IntelliTone probe, multiple adapters, and durable carry case for field professionals.

Fluke 77 IV Multimeter: Accurate AC/DC measurement up to 1000 V with backlit display, auto/manual ranging, and ergonomic design for field or bench use.

Fluke 561 thermometer: Dual IR and contact temperature readings from -40°C to 550°C, ideal for HVAC, electrical, and industrial applications.

Wöhler HBF 420 Moisture Meter delivers practical moisture assessment for wood and building materials using resistance and dielectric measurement for diagnostics, construction prep, and wood fuel checks.

Wöhler TF2 Surface Temperature Probe 6626 delivers Type K surface temperature measurement up to 932 °F for compatible Wöhler analyzers and meters.

Wöhler Snap & Sweep Regular Cleaning Rod 1222 is a single 3 ft rod with snap-in quick connectors for extending a Snap & Sweep chimney and exhaust cleaning assembly.

Wöhler 3847 Guidance Sleeve with Protection Cage supports guided, protected travel for 1 in camera heads during visual inspection work in drain lines, ventilation runs, flue gas systems, and similar pathways.

AUTEL ROBOTICS EVO II Battery: Extend your drone’s airtime with 40 minutes of flight, quick install, LED indicators & durable 7100mAh design.

CrimpPro HEX Crimping Tool: Effortless crimping with reduced fatigue. Features a lever action, ratcheting mechanism, and versatile HEX sizes for reliable results.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

The Fluke 53-II B is a single input digital thermometer designed for contact temperature measurement using J, K, T, E, N, R, and S thermocouples. It logs up to 500 temperature readings at user-adjustable intervals and includes a real-time clock for time-stamped data review.

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

Fluke TP82 insulation piercing probe tips enable non-destructive testing through wire insulation. Designed for 4 mm banana leads, they support precise diagnostics on automotive sensors and wiring without stripping insulation.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

Pomona 5898 extra durable DMM test lead set with stainless steel probe tips, 4mm shrouded banana plugs, silicone-insulated leads, and CAT III 1000V rating for precise, reliable multimeter measurements.

Pomona 5907A IEC 1010 DMM test lead kit delivers flexible, silicone-insulated 4 mm sheathed banana connections for Category III multimeter measurements with reliable contact and high safety compliance.