Search results for: 'are tre'

Fluke Networks 10200000 spare modular adapters provide reliable 4/6-wire access for telecom testing, enabling quick, non-intrusive circuit connections.

Buckleys WRP01 Wet Roof Pro’ is a roof leak detector for locating faults in wet flat roofing membranes using voltage gradient measurement across non-conductive surfaces over conductive substrates.

The Hydrajaws Wall Tie Tester Kit MK2 is used for testing all types of remedial wall tie. Trusted by market-leading companies, the Wall Tie Tester Kit is an essential tool for carrying out testing procedures in line with BRE Digest 401. Manufactured to exacting high standards, the Hydrajaws Wall Tie Tester Kit contains a small bolt tester adaptor and two threaded rod adaptors (M5 and M6) to test up to a maximum tensile load of 10kN. The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent.

Fluke FUSE-11A/1000V B5 replacement fuses provide 11A, 1000V protection for Fluke digital multimeters, ensuring safe, reliable overcurrent protection.

Fluke Networks QC-MMC-16-5P QuickClean tools provide fast, reliable cleaning for 16 MMC connectors in a convenient five-pack for fiber maintenance and testing needs.

The Keyence OP-87406 is a 45 mm mounting screw designed to fix the dedicated adjustable bracket for the Keyence LR-Z Series self-contained CMOS laser sensors. It consists of a nickel-plated steel bolt with matching iron nut and washer, providing a secure fastening solution for compatible LR-Z Series sensor installations.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

AEMC 2135.44 Auxiliary Ground Rod Set provides two 17-inch stainless steel T-shaped auxiliary ground electrodes designed for ground testing and temporary grounding measurement setups.

AEMC 2152.16 Screw-On Alligator Clip Set includes color-coded red and black clips designed for electrical testing connections and rated for use up to 1000V CAT IV environments.

The Wöhler Threaded Brush, HT (19820) is a heat-resistant, 2-layer threaded brush with an M10 connection and a 7.9" (20 cm) diameter—built for demanding cleaning tasks in high-heat environments.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

Glass lens Hinged stainless cover Ideal for jewelry, electronics, and inspection

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

2 bright LEDs 3.5X(10D) magnification Lens diameter Ø 1.8 in. Lens material: Glass Magnification: 3.5X(10D) Lens size: Ø 1.8 in. Light source: 2 pcs LEDs Battery: 1.5V AAA x 3 pcs (not included)

Static dissipative mat for workstation Heat tolerance: 70° C Resistivity Face & Center & Bottom Layers: 10M~1KMΩ/SQ Combination layer: 1K~1MΩ/SQ, Static decay time: < 0.5sec

The Fireye 4-314-1 is an ultraviolet sensing tube used in Fireye flame scanner assemblies. This tube is supplied as a standalone replacement component and is identified on the original manufacturer carton for use with select 45UV series scanners. No scanner body or accessories are included.

The GE IC2956A206A is an industrial interlock snap-action contact block used as a control component within safety and machine control systems. This unit is a standalone mechanical contact block featuring a snap-action mechanism for consistent contact switching. No additional accessories or hardware are included.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Wöhler Aluminium Case XXL 5824 is an aluminum pilot-style carrying case built for organized transport and storage, with a roomy 18.9 x 10.6 x 18.9 in format suited to compatible Wöhler equipment and accessories.

Pomona 5697-60 antenna cable delivers reliable 50 ohm BNC connectivity with gold-plated contacts and high-quality construction in a non-booted design.

Fluke Networks FI1000-1.25-UTIP probe tip enables clear inspection of 1.25mm fiber connectors with the FI-1000 video probe for reliable patch cord testing.

Fluke H-T6 Holster: Durable fabric case with belt loop and flap for T6 testers, ensuring secure, hands-free storage for electricians and technicians.

AEMC CASE-SC Clamp Meter Case: Soft replacement case with handle for models 401, 403, 405, 601, 603 & 605. Protects and carries with ease.

Allen-Bradley PN-94201 is an industrial fiber optic cable designed for reliable optical signal transmission in automation environments where electrical noise immunity and stable communication are required.