Search results for: 'designated、'

The INNO Instrument  Universal Fiber Holder is an accessory designed for INNO fusion splicers to position and secure optical fibers during splicing. The holder supports multiple fiber preparation types and provides stable alignment inside the splicer. Variant options support different splicer models and left or right holder configurations.

A 2-layer threaded brush that uses stainless steel flat wire bristles. With diameters ranging from 6 to 14" and a standard M10 thread, it’s designed for fast attachment to compatible threaded cleaning rods and systems

Leviton 069-ML1-C MiniLock Connector delivers secure 15A 125V industrial-grade power connectivity using a compact locking design for reliable electrical connections in demanding environments.

Champion TSW-12A-2P Power Switch Box delivers reliable dual AC power switching in a compact enclosure designed for controlled electrical distribution and system integration.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

Fluke 3PHVL-17XX-5M is a 3-phase + neutral voltage test lead cable assembly designed for structured multi-phase measurements, delivering organized lead management and reliable electrical connectivity over a 5 m length.

The Balluff BFO-48G-DSV-SC-1 is a glass fiber optic cable designed for use with a separate fiber optic base unit. It supports diffuse reflection sensing in side-view configurations and is suited for industrial detection tasks in harsh environments.

The Raco 3543-8 is a 3/4 in. 90 degree liquidtight connector with an insulated throat, designed for use with flexible metallic and Type B flexible nonmetallic liquidtight conduit in wet locations. Constructed from zinc-electroplated steel/malleable iron for corrosion protection.

Fluke Networks REMOTEID-1 Replacement Remote ID wiremapper enables accurate Ethernet cable identification and wire mapping when used with LinkIQ Cable+Network Testers.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

Honeywell 511-96019-101 Process Network Interface Module enables reliable communication within Honeywell TDC 3000 and Experion PKS distributed control systems, supporting Process Manager I/O network integration.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

The Bussmann JKS-40 is a Class J fast-acting, current-limiting fuse rated at 40 A and 600 Vac. It is designed for rapid response to short-circuit conditions in industrial and commercial electrical systems requiring high interrupting capacity.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

Pomona 6041B extra large alligator clip set delivers secure high-voltage test connections with integrated 4mm safety jacks, designed for IEC-compliant electrical measurement applications.

Pomona 5697-60 antenna cable delivers reliable 50 ohm BNC connectivity with gold-plated contacts and high-quality construction in a non-booted design.

Pomona 3847 BNC female-to-female adapter features a hermetic seal with ultra-low leakage, gold-plated contacts, and PTFE dielectric for secure connections.

Fluke C195 soft carrying case provides secure instrument storage with a zippered design, detachable side pockets, and adjustable shoulder strap for easy transport.

Fluke 71X-TRAP liquid and dirt trap protects pressure calibrator pumps by preventing moisture and debris transfer during calibration tasks.