Search results for: 'rate.'

Dual-function cable and network tester: complete copper cable verification, network diagnostics up to 10G Ethernet, Wi-Fi analysis up to Wi-Fi 6E, and PoE load testing and switch port identification.

The AEMC 6555 is a 15kV digital megohmmeter for insulation testing on motors, cables, and electrical apparatus. It supports fixed/variable voltage tests, step and ramp profiles, automatic DAR/PI/DD ratios, on-screen graphs, and USB/DataView reporting with storage for up to 80,000 points.

AEMC PowerPad IV 8345 Analyzer: Class A three-phase power quality analyzer with touch LCD, transient capture, energy valuation, and remote control.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Fisher XLT30-D acoustic leak detector with Multi-Sensor delivers precision underground water leak detection on hard and soft surfaces using advanced filtering and LCD audio visualization.

Fisher TW82HC 82.175 kHz underground line tracer for locating buried pipes and cables. Digital depth, azimuth, and signal current display with conductive and inductive tracing modes. Hard case included.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Fluke FEV-CON-TSL is a Tesla type connector and cable designed for testing AC electric vehicle charging stations when used with the Fluke FEV100 EV Charging Adapter. It enables functional and safety testing of Tesla wall connectors at residential and commercial charging locations. Not compatible with DC fast chargers or Tesla Superchargers.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

Banner Engineering IAT210S glass fiber optic sensor cable with diffuse-reflective sensing. Features a right-angle brass sensing end, stainless steel monocoil sheathing, 3.2 mm glass fiber core, and 4.572 m length. Designed for use with a separate fiber optic amplifier.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

Fluke T150 two-pole voltage and continuity tester delivers fast AC/DC measurements from 6–690V with backlit LCD, switchable load, resistance testing, and multi-mode voltage indication for electrical diagnostics.

Fluke T130 voltage and continuity tester delivers reliable AC/DC testing from 6–690V with LCD display and switchable load, helping electricians verify live and dead circuits safely and clearly.

Fluke T+PRO-1AC combines a full-featured electrical tester with a non-contact AC voltage detector for safe AC/DC testing, continuity checks, GFCI testing, and fast live circuit detection.

Fluke Networks MRC-50-LCLC-0.3M-M is a multimode 50µm LC-LC test reference cord with a durable metal latch, engineered for OTDR port protection and accurate fiber certification measurements.