Search results for: 'goods goods'

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Fluke AC173 alligator clip set delivers secure electrical connections for 4 mm banana plug test leads. Designed for modular Fluke leads, it supports safe, hands-free measurements in demanding electrical environments.

Fluke TP175E TwistGuard Test Probes provide adjustable 2mm probe tips with integrated 4mm adapters, delivering safety-rated electrical testing for multimeters while minimizing exposed metal during measurements.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Fluke FUSE-440MA/1000VB5 is a 440mA 1000V fast-acting replacement fuse pack engineered for Fluke digital multimeters, maintaining proper internal circuit protection and measurement safety.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

Fluke Networks VisiFault Visual Fault Locator (VFL) – Quickly pinpoint breaks, bends, and faulty connectors in fiber optic cables. The bright red laser makes defects easy to see for fast troubleshooting and verification.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

The Allen-Bradley 800T-Q10R is a 30mm red pilot light with a full-voltage incandescent lamp rated for 120V AC/DC. Designed for industrial control panels, it features a metal operator construction, screw terminal connections, and compatibility with NEMA Type 1, 4, 12, and 13 enclosures.

Phoenix Contact UT 6-HESILA fuse modular terminal block designed for 6.3 x 32 mm glass or ceramic fuses. Rated at 250 V and 10 A, this DIN-rail mount terminal block uses a screw connection method and includes an integrated LED fault indicator for fuse status monitoring. Supplied as a quantity of 10 units.

Schneider Electric 750XCXH-120A is an 11-pin octal plug-in power relay with a 120 VAC coil and 3PDT contact form. Designed for general-purpose and hazardous-location applications, it features silver alloy, gold-flashed contacts and continuous-duty operation.

The AMP 531-353-5 is a panel mount card edge connector from TE Connectivity AMP Connectors. It features six power positions arranged in two rows with female contacts and solder termination. The connector is designed for panel mounting and accepts 0.062 inch card thickness, using a glass-filled polyester housing.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

The Moore Industries DCA/4-20MA/SH2/117AC-DPDT-GP is a DC current alarm trip module designed to monitor a 4–20 mA process signal and actuate relay contacts when a high alarm setpoint is exceeded. It operates on 117 VAC power and provides DPDT relay outputs for alarm signaling.

The ABB RDIO-01 is a digital I/O extension module designed for use with ABB drive systems. It provides three digital inputs and two relay outputs for expanding control and monitoring functions within compatible ABB drive architectures.