Search results for: '1000 USD to $$$'

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

2-5 Mins quick heat up time 1.5 hour operation time Cordless design to work anywhere Ceramic heater provides stable temperature Drip control prevents unwanted glue on project Status indicator light Convenient USB charging Consumption: 8W Flow Rate: 3g per min Preheating Time: 2 - 5 min Input Voltage: 5V Melting Temperature: 266°F Indicator Light: Blue (In Use) / Green (Fully Charged) / Red (Charging) Glue Sticks: Ø7mm (not included) Charging Time: 200 minutes Operating Time: 90 minutes Power Source: 3.6V Li-ion Battery (2000mAh)

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

AEMC 5060 Digital Analog Megohmmeter — A 5000V Insulation Tester with USB, DataView® Software, and Advanced Insulation Diagnostics.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Pitot Tube Type S Ranges

Pitot Tube Type S Ranges

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

AEMC 514 Clamp-On Meter delivers AC/DC current, TRMS, voltage, frequency, ohms, and continuity with a large, 4000-count display and 1-year warranty.

Fluke T5-600 tester offers fast AC/DC voltage, continuity, and 100 A current checks with OpenJaw™ design and detachable SlimReach™ probes.

Emerson Ovation 1C31132G01 is an analog output personality module designed for four-channel Ovation analog output subsystems, routing field signals for 0-5 V, 0-10 V, and 0-20 mA output configurations.

Pitot Tube Type S Ranges

Pitot Tube Type S Ranges

Amprobe AMP-330 Clamp Meter: Accurate 1000A AC/DC, temperature, and flame sensor testing for motors, HVAC, and industrial electrical systems.

Pitot Tube Type S Ranges

Adam Equipment PT 115S Stainless Steel Platform: Built tough for industrial weighing, with waterproof IP66 protection and a hygienic stainless design.

Meet the Fluke 1734 Three-Phase Energy Logger – your go-to tool for easy, accurate energy monitoring. Track voltage, current, power, and more with WiFi connectivity and real-time data via the Fluke Connect® app. Perfect for spotting energy waste and optimizing your facility’s efficiency. Ready to take control of your energy use?

Amprobe DGC-1000A Ground Resistance Tester delivers fast clamp-on testing from 0.025–1500 Ω with true-RMS current measurement and onboard data logging.