Search results for: 'Disco'

INNO Instrument SCTH60 current sensor with 0–60A DC range, 60Apeak AC range, 28 mm aperture, DB9 connector, and DC to 800 kHz bandwidth for precision current measurement.

INNO Instrument SPA1000 digital power meter with 1 power channel, AC/DC measurement, 100 kHz bandwidth, up to 1000 V and 20 A input, 4-item LED display, and harmonic measurement to the 100th order.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Lenze AC Tech M1430B MC1000 series variable frequency drive rated 3 HP (2.2 kW) with 400/480 VAC 3-phase input and 0–120 Hz output in a NEMA 1 enclosure. Front keypad/faceplate with control buttons is missing; front of drive is open.

Cisco 2821 Integrated Services Router with WAAS NME-WAE-502-K9 for WAN optimization, onboard Gigabit Ethernet, and WIC-1DSU-T1-V2 T1 CSU/DSU connectivity. Modular design for branch networking versatility.

Easy-Laser Case 3 shim kit with Types A/B/C/D, 0.05–2.00 mm stainless steel shims, permanently marked and burr-free. Foam-organized case for precise machine alignment setups.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

INNO Instrument SPA3000 digital power meter with 3 power channels, up to 1000 V measurement, DC to 100 kHz bandwidth, and 4-item LED display for voltage, current, and power measurement.

The INNO Instrument OLL-1000-652D-SC-APC is a 1000 m single-mode OTDR launch fiber reel designed for dead-zone elimination in fiber optic testing. The assembly uses G.652D single-mode fiber and SC/APC connectors to support accurate reflectance and insertion-loss measurement when testing optical links with an OTDR.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.