Search results for: 'angled'

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

Certified pre-owned Waygate 57K0202P1 60° shear wave angle beam wedge for 0.50" Accupath transducers. Engineered for accurate weld inspection and flaw detection in carbon steel per industry standards.

Digi-Pas DWL-5800XY is a 2-axis inclination sensor module built for precision plane leveling, 2D tilt angle, straightness, vibration measurement, and real-time data logging, with 1 arcsec resolution and PC Sync PRO Software included.

Digi-Pas DWL280Pro waterproof digital torpedo level delivers 0.05° resolution, IP67 protection, magnetic V-groove alignment, and LED angle measurement for precise leveling in demanding indoor and outdoor work.

The PLS 3X360R KIT is a red three-plane laser level featuring 360° horizontal and dual 360° vertical fan angles for plumb, level, and square layout. The kit includes the 3X360R tool, RBP5 Li-ion rechargeable battery pack, power supply, magnetic L-bracket, red reflective target, canvas pouch, and blow mold case.

AEMC 2152.10 Utility Test Lead Kit #1 provides 1000V CAT IV-rated electrical testing capability with silicone-insulated safety leads, screw-on measurement accessories, and secure right-angle banana jack connections for demanding field and maintenance applications.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

Certified pre-owned Sonatest D1SW-N60S-IH 60° shear wave phased array wedge for D1S series phased array probes. Delivers accurate 60° refracted angle inspections in steel for weld, forging, and structural applications.

Digi-Pas DWL5500XY 2-axis precision tilt sensor module delivers real-time leveling, dual-axis angle, and vibration measurement with RS485 output, IP65 protection, and embedded integration for machinery and structural monitoring.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

The Banner BA1.53SMTA is a high-temperature diffuse-mode bifurcated glass fiber optic cable with stainless steel monocoil sheathing. It features a tight right-angle side-view sensing tip, 36-inch fiber length, and 2.3 mm bundle diameter for reflective sensing applications.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

HYTORC LST-2000 Lithium Series II torque tool with 36V battery drive, reaction arm, TorcSense torque measurement, and digital control interface for precision industrial bolting.

Digi-Pas DWL5000XY is a 2-axis precision tilt sensor module for real-time leveling, tilt angle, and vibration monitoring in machinery, equipment, and structural systems.

Certified pre-owned Sonatest MAP252545T phased array mapping ultrasonic probe—estimated 2.5–5 MHz frequency range, 25 mm aperture, top exit configuration. Delivers rapid area mapping for corrosion, weld, or composite inspection. Compatible with Sonatest Veo3, Prisma, and mapping scanners.

AEMC replacement set of 2 needle tip test leads, color-coded red/black with 4mm right-angle plugs. Rated 600V CAT IV shielded, fits meters 5212-5217.

Digi-Pas DWL3500XY-USB brings 2-axis high-precision leveling, alignment, and vibration measurement together with 0.001° resolution, absolute and alternate zero modes, and USB-based data logging for precision machine setup and inspection.

All-angle ball joint mirrors with stainless steel mirror back Visual inspection of hidden areas Double ball joint links swivel mirrors for viewing 360° Made of tempered spring steel to move freely and hold desired position Replaceable, plated, copper-backed, clear-view mirrors Non-rotating inner hex rods prevent mirrors from swinging out of alignment Insulating vinyl grip

Digi-Pas DWL9000XY: Ultra-precision 2-axis digital level & inclinometer with Bluetooth. Streamline setups and alignments with real-time data logging and superior accuracy.

Certified pre-owned Technisonic CF-0204-GP, 2.25 MHz, 1/2" general purpose fingertip contact transducer—Microdot connector, perfect for flaw detection and thickness measurement in challenging or restricted areas. Compatible with major industry flaw detectors and gauges