Search results for: 'disc 2'

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

Single SciAps LIBS argon purge canister for carbon analysis on Z-Series instruments including Z-200 C+, Z-300 Series, Z-902 Carbon, Z-903, and Z-901 Carbon. Supports precise carbon and CE testing.

ETRI 148VK0282072 axial AC fan rated 115V AC, 50/60Hz, single-phase. Zamak housing with plastic impeller (UL 94 V0) and ball bearings. Thermally protected motor. 172 × 150 × 38 mm form factor with 305 mm leads (AWG20).

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

INNO Instrument SBT60 battery tester measures internal resistance and voltage using an AC four-terminal method, with 6 V and 60 V ranges, comparator functions, storage, and statistical analysis for battery testing and sorting.

Toshiba VFS11-4015PL-WN VF-S11 transistor inverter for 3-phase AC motor control. Rated 2 HP with 380–500 V input/output and 0.5–500 Hz output frequency range.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The Thermo Scientific Niton XL2 980 Plus is a handheld XRF analyzer equipped with the General Metals license for routine alloy identification. It supports fast, on-site verification of ferrous and non-ferrous metals in inspection, quality control, and materials handling environments.

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

Philips Advance AmbiStar RELB-2S40-N delivers reliable, energy-efficient rapid-start operation for T12 lamps. Ideal for 120V fixtures needing a dependable electronic ballast.

Single Fluke DTX-MFM2 multimode fiber module for 850/1300 nm dual-fiber loss and length testing. Supports SC output, interchangeable adapters, VFL, and FindFiber functions.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.