Search results for: 'form'

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Allen-Bradley 700-HK36A1 is a Bulletin 700-HK slim line plug-in relay with a 120V AC coil and SPDT contact configuration. It supports up to 16 A resistive loads and is designed for high-density industrial control and interposing applications.

The Fluke PTi120 is a rugged pocket thermal imager designed for industrial inspection. It features a fully radiometric 120 x 90 infrared sensor, 3.5-inch LCD touchscreen, IR-Fusion™ imaging, and a -20 °C to 150 °C temperature measurement range in a compact, portable form factor.

Fluke I400 AC Current Clamp Adapter enables safe, non-intrusive AC current measurement up to 400A using a digital multimeter. Compact design with 1 mA/A output and banana plug connection.

The General Electric TEY120 is a 1-pole, 20-amp molded case circuit breaker designed for 277 VAC systems. It features a bolt-on mounting style, thermal magnetic protection, and LI trip functions. Rated at 14 kAIC at 277 V, it is commonly used in commercial and industrial lighting panel applications.

The Allen-Bradley 1734-TBS is a POINT I/O terminal base assembly with an 8-position spring-clamp removable terminal block. Designed for compact distributed I/O systems, it supports DIN-rail mounting, removable wiring, and compatibility with multiple POINT I/O modules.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Banner Engineering BAT2.53S is a BAT Series glass fiber optic sensor with diffuse sensing mode and a right-angle threaded sensing tip. It features a stainless steel monocoil sheath, brass sensing end, 4 mm core diameter, and 0.914 m fiber length for demanding industrial sensing environments.

Fluke Networks D814 Impact Tool delivers consistent telecom punch down performance with adjustable impact control and included Eversharp 110 and 66 blades for clean, reliable wire terminations.

Fluke PLS RBP5 rechargeable battery pack delivers extended runtime for compatible PLS laser levels, reducing downtime and eliminating disposable batteries while supporting multiple PLS handheld laser models.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

Fluke BP190 rechargeable NiMH battery pack delivers 7.2V power for ScopeMeter 190, 190C, and 430 Series instruments, providing reliable internal power with OEM-matched fit and capacity.

Fluke 717 300G Pressure Calibrator provides -12 to 300 psi measurement with 0.05% accuracy, multiple pressure units, and rugged field-ready design.

Philips 3186GH242T450APA9 aluminum electrolytic capacitor designed for industrial power electronics, offering 2400µF capacitance, 450VDC rating, and 525V surge handling in screw-terminal form.

Fluke 700LTP-1 Low-Pressure Test Pump generates vacuum and pressure up to 100 psi with controlled bleed valve for precise low-pressure calibration.

Fluke Networks NFC-CUBE Cleaning Cube offers 125 precision wipes for fiber optic end-face cleaning, ensuring clear connections and reliable performance.

Fluke handheld tachometer measures RPM and surface speed with contact and non-contact modes, ideal for industrial and manufacturing applications.

Fluke BT521 Battery Analyzer: Efficient, accurate battery testing with automatic logging, threshold alerts, and mobile app support for professionals.

Wöhler DM 2000 Digital Manometer Kit brings fast, straightforward pressure measurement with one-button operation, rapid response, and a 0.01 to 2,000 hPa range for HVAC, gas, environmental, and industrial testing.

Wohler DM2000 Rubber Hose 1.5m delivers dependable flexible connection for compatible testing and measurement workflows, supporting secure routing and practical reach in everyday field use.

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Introducing the OWON P4305: Precision Power in a Compact Form.