Search results for: 'general 5'

Fluke 80PK-22 immersion temperature probe delivers reliable Type-K measurements for liquids and gels. Designed for wide temperature ranges and fast response when used with compatible thermocouple instruments.

Phoenix Contact MSTB 2,5/2-STF plug-in terminal block delivers secure PCB wiring with screw clamp reliability and COMBICON compatibility for industrial connections.

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

Handle pulls out to access second lens 3.5X (10D) / 20X (76D) magnification Large lens Ø 2.0 in. Small lens Ø 0.7 in. Lens material: Acrylic Battery: 1.5V AAA x 3 pcs (not included)

Fluke IntelliTone Pro 200 Tone Generator and Probe: Accurately trace and locate twisted pair, coax, and cable runs with digital and analog signaling. Ideal for network technicians needing reliable cable tracing in active networks.

The Allen-Bradley 1769-IQ16 is a Compact I/O 16-point, 24V DC digital input module for CompactLogix and MicroLogix 1500 systems. It supports sinking and sourcing inputs, provides LED status indication per point, and installs via DIN rail or panel mount.

Allen-Bradley 1334-50907 Line/Converter Power Module for Bulletin 1334 AC drives. Internal power board supporting sine-weighted PWM motor control in 5–10 HP variable frequency drive systems.

Allen-Bradley 100-C12D10 contactor with 193-EA1DB E1 Plus overload relay provides IEC motor switching with electronic overload and phase-loss protection for reliable industrial motor control.

Fluke 80PK-8 Type K pipe clamp thermocouple probe for fast pipe-surface temperature readings on 1/4–1-3/8 in lines, with durable ribbon sensor and 40 in lead.

Hubbell HBL5366C Insulgrip plug delivers a durable 20A 125V NEMA 5-20P connection with a rugged nylon housing, adjustable cord clamp, and industrial-grade reliability.

Allen-Bradley 871A-TS5-DM1 M12 5-Pin field-attachable connector offers reliable IP67 wiring for sensors and automation devices, supporting 6–8 mm cables.

Certified pre-owned Sonatest PQC253.5, 3.5 MHz, 0.25" single crystal angle beam shear wave ultrasonic transducer with quick change threading—engineered for precise weld inspection and flaw detection in industrial and field NDT. Accepts quick change (QW) wedges for 45°, 60°, 70° shear wave inspection.

Allen-Bradley 1746-OW8-SERA delivers reliable 8-point relay output control for SLC 500 systems, supporting AC/DC loads with flexible mixed-voltage compatibility.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

AEMC 6292 Micro-Ohmmeter: Portable low-resistance tester with 200A current, precise measurement, and DataView software for efficient reporting.

INNO Instrument SPA6000 is a modular power analyzer with a 12.1-inch touchscreen, support for up to four input modules, 512GB internal storage, and AC/DC power measurement bandwidth from DC to 5MHz.

Fluke FI-500 FiberInspector Micro — High-resolution fiber end-face inspection camera with built-in PortBright™ illumination, autofocus in seconds, compact probe to access tight panels, and large display for single-mode/multimode connectors—ideal for fast verification in dense installations.

2.8 in. Diameter Lens 6D (2.5X) + 20D (6X) Dual Magnification 8 Bright LED lights UV Light for Currency Detection

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The Fluke CO-220 is a handheld carbon monoxide meter designed to detect and measure CO concentrations from 0 to 1000 ppm. It uses a stabilized electrochemical, gas-specific sensor and provides both numeric LCD readings and an audible beeper response. Features include MAX Hold, automatic backlight, sensor self-test, and automatic power-off.

The Fluke 51-II is a handheld single-input digital thermometer designed for contact temperature measurement using J, K, T, or E type thermocouples. It delivers fast response with laboratory accuracy and features a large backlit dual display, Min/Max/Avg functions, electronic offset, and 60 Hz noise rejection.

Amprobe TH-1 handheld humidity and temperature probe meter delivers fast RH, temperature, dew point, and wet bulb readings with a dual display and data hold for reliable comfort-level assessments.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.