Search results for: 'instandgesetzt'

INNO Instrument SBT300 battery internal resistance tester for measuring battery resistance and voltage up to 300V. Includes BZ-1001 zero setting panel, BL-1001 pin test line, BL-1002 clip test line, and installed LAN/RS-232C, analog output, and EXT I/O interfaces.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

Allen-Bradley 1771-A2B PLC-5 8-slot I/O chassis provides a stable backplane platform for 1771 modules, supporting modular control system expansion with secure back-panel mounting.

WOHLER Mirror Spacer (Black - One per Mirror)

Eaton B-Line BPR2 is a two-device metal protector plate designed for receptacle, GFCI, decorator, or blank openings to help block drywall mud, paint, and debris during installation.

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

Fluke TLPV1 MC4 to 4mm test lead set enables safe, accurate measurements on MC4-connected solar PV systems using 4mm banana plug instruments, with included MC4 disconnect tool.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

Eagle Eye SG-Ultra Max Battery Cover designed for the SG-Ultra Max Digital Hydrometer battery compartment.

The Georg Fischer Signet 3-8510 is an integral-mount paddlewheel flow sensor designed for use in liquid flow measurement applications. This sensor is part of the GF Signet flow measurement platform and is intended for installation within compatible piping systems to generate a flow-proportional signal.

The Yamatake Honeywell J-MBU01 is a base unit backplane used in legacy distributed control systems. It provides a multi-slot platform for installing compatible control and I/O modules within an industrial control cabinet. The unit shown is the backplane only, with no modules installed.

Fluke Networks NFA-LC interchangeable LC adapters enable accurate optical power measurements with SimpliFiber Pro, CertiFiber Pro, and DTX-xFM2.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Steel City RS 2 surface cover provides a durable, galvanized finish for mounting a toggle switch and duplex receptacle on 4" square boxes in exposed installations.

Steel City RSL 8 raised device cover provides a durable, galvanized 4-11/16" square solution for mounting two duplex receptacles in commercial installations.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.