Search results for: 'kaiop'

The PROFLO PFRCKU is a 6-inch, two-bolt pipe repair clamp designed for use on 2-inch pipe. It features a 430 stainless steel band, NBR gasket, and plated hardware, supporting a 150 psi pressure rating and a working temperature range from -30°F to 180°F.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

The AMLOC 1204416-19 is a capacitance sensor assembly housed in a sealed enclosure with a rear-mounted multi-pin connector. This unit consists of the sensor electronics only and does not include a probe or external accessories. Identification and configuration are based on visible labeling and construction.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The ATC TDH-120-ALA-100 is a delayed interval time delay relay designed for industrial control applications. It operates on 120 VAC/DC supply voltage and provides an adjustable delay range from 1 to 100 seconds using dual front-mounted dials. The relay features a plug-in octal base and relay contacts rated at 10A.

Transmation 3510T-03-06-07-65-71-72 3510T current transmitter module designed for industrial signal conditioning. Converts input signals to a standardized 4–20 mA DC output for reliable process control transmission.

Fluke iFlex 24" probes measure up to 3000A AC with ultimate flexibility, ideal for energy logging with Fluke 174x series meters.

Our only crimper for Cat7 connectors Also works with RJ45 (cat 5/6), RJ12, RJ11 Precise parallel crimp action Handle lock for easy storage

Airpax UPL111-25620-1 is a 3-pole magnetic-hydraulic circuit breaker for panel-mounted power switching and circuit protection in commercial and industrial equipment.

Bently Nevada 330102-00-40-10-02-00 proximity probe cable assembly for 3300 XL 8 mm monitoring setups, built for proximity measurement connection in machinery monitoring systems.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

Allen-Bradley 43GR-TBB25SL is a glass fiber optic cable for diffuse sensing applications. It features a bifurcated configuration, threaded axial brass tip, stainless steel flexible conduit sheathing, and a custom 36 in cable length for industrial sensing use.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The Modicon AS-B875-002 is an 8-channel analog input module designed for use with Modicon 984 programmable controllers. It accepts either 1–5 V or 4–20 mA input signals and converts field analog signals into digital data for PLC processing.

Fluke Networks D814 Impact Tool delivers consistent telecom punch down performance with adjustable impact control and included Eversharp 110 and 66 blades for clean, reliable wire terminations.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The Allen-Bradley 800T-Q10R is a 30mm red pilot light with a full-voltage incandescent lamp rated for 120V AC/DC. Designed for industrial control panels, it features a metal operator construction, screw terminal connections, and compatibility with NEMA Type 1, 4, 12, and 13 enclosures.

The Square D 9007C54A is a heavy-duty industrial limit switch designed for position sensing in automation and machinery applications. It features a rotary actuator with spring return operation, a rugged metal housing, and electrical ratings up to 600 V and 10 A. UL and CSA markings are present on the unit.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.