Search results for: 'motor up'

Agastat 7014SC delivers reliable 2–20s on-delay timing with 4PDT contacts for industrial automation, offering durable electropneumatic performance and high repeatability.

Wohler VIS 750 is a complete HD inspection camera system in a clean, portable trolley. Includes a 7" monitor, an HD pan & tilt camera head with motorized focus, and a 130’ or 200’ push rod, built for long pipe runs and cleaner transport.

Fluke 1550C KIT Insulation Resistance Tester delivers up to 5 kV testing with adjustable test voltages: 50 V increments up to 1000 V and 100 V steps for test voltages over 1,000. Includes DAR results, rugged IP67 case, and long battery life for field use.

The Fluke 51-II is a handheld single-input digital thermometer designed for contact temperature measurement using J, K, T, or E type thermocouples. It delivers fast response with laboratory accuracy and features a large backlit dual display, Min/Max/Avg functions, electronic offset, and 60 Hz noise rejection.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

The Eaton Bussmann DFJ-30 is a 30A Class J high speed, current-limiting drive fuse designed to protect AC and DC drives and power semiconductor devices. Rated up to 600 Vac and 450 Vdc, it provides very low I²t let-through energy and high interrupting capacity for demanding industrial applications.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke A3001 FC: Wireless iFlex AC current module delivers true-RMS measurements, backlight display, and safe remote monitoring via Fluke Connect app.

Fluke 87-5 CAL Industrial Multimeter: True RMS digital readings, fast peak capture, low-pass filter support, and backlit display for efficient troubleshooting.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Fluke 54 II B Dual Input Data Logging Thermometer measures J, K, T, E, N, R, and S thermocouples with dual inputs and true differential capability. Logs up to 500 data points with adjustable intervals and supports IR USB export.

AEMC MN307 AC Current Probe: Measures up to 12A with 100mV/A output. Compact design with banana plug lead, ideal for low AC current and leakage measurements.

AEMC 205 Power Clamp-On Meter: TRMS readings for AC/DC volts, amps, power, THD & phase. Built for tough jobs with flame-retardant body & IP54 rating.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

INNO Instrument SPA2000 digital power meter with 1 power channel, up to 1000 V and 50 A measurement, DC to 100 kHz bandwidth, 4-display LED readout, harmonic analysis to the 100th order, and USB, Ethernet, RS-232/GPIB, and D/A interfaces.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

Fluke 810 Vibration Tester delivers on-board machine diagnostics with tri-axial vibration measurement and laser tachometer feedback, helping identify fault type, severity, and location in rotating equipment.

AEMC PEL 115 Power & Energy Logger provides field-ready power and energy logging for audits, diagnostics, and maintenance with rugged design and flexible data access.

Fluke FLK-A3000FC clamp meter offers true-RMS AC current measurement, wireless data sharing via Fluke Connect, and onboard logging for up to 65,000 readings.

The Ferraz Shawmut USCC3I is a 3-pole ULTRASAFE modular Class CC fuse holder rated for 600 VAC and 30 A. It accepts Class CC fuses only, incorporates integrated blown-fuse indicators, and mounts on standard 35 mm DIN rail for industrial electrical panels.

Fluke 902 FC Clamp Meter: Wireless HVAC tool with flame rod µA measurement, 60kΩ resistance range, and Fluke Connect® for safer, remote diagnostics.