Search results for: 'thanks that'

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The Ti200 infrared camera delivers the flexibility and performance to allow you to stay on top of innovation, whether it's through industrial or commercial applications. You'll be able to spectrum analyze, detect heat and radiation level variations, or use it for industrial process control — all with wireless speed and ease. And, since it's future-ready, no matter what comes next for your business, so long as you have an infrared camera on hand, you'll be ready.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The Digiphone+ pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive faults that is unsurpassed in sensitivity.

WOHLER Snap & Sweep Rotary Chains Head - The Ultimate Cleaning Solution!

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

Singlemode and Multimode testing Built-in universal 2.5 mm tip sleeve PON, Telecom, CATV, and LAN/WAN applications Dual wavelength laser source and power meter options High accuracy and wide dynamic range Save OPM measurements (>100 single results) Transfer stored results to a PC or upload results to Fiberizer Cloud via micro USB interface for report generation and printing Reference power level setup and recall Splash-resistant keypad and chassis design High-contrast display - Visible outdoors and backlight for indoor or low-light conditions Alkaline or Rechargeable battery option with Auto power off Field-interchangeable optical adapters support multiple connector types and allow easy access for cleaning

Introducing the Adam Equipment WBW 6AM WBW washdown scales: your go-to choice for precise and efficient weighing in wet environments. These scales are designed to excel where others fall short, offering unrivaled durability and practicality. With their IP66-rated waterproof housing, you can trust them to deliver consistent performance even in the harshest conditions. And thanks to the spacious stainless steel weighing pan, cleaning up after use is a breeze. Say goodbye to the hassle of maintenance and hello to hassle-free weighing!

Olympus DP-2000 Handheld XRF Analyzer: Fast, reliable metal & alloy analysis with rugged design, Docking Station, and essential accessories. Ideal for precision testing.

Product Overview

The CFP2-100-Q CertiFiber Pro Quad Optical Loss Test Set (OLTS) helps cabling professionals accomplish more than ever and comes with a Wi-Fi adapter for wireless connectivity to Fluke Networks LinkWare Live software. It's all about accurate, error-free certification, making jobs easier to manage and certifying fiber optic cabling to industry standards, faster.

Thermo Scientific Niton XL2 800 XRF is a lightweight, rugged, easy-to-use by non- technical personnel handheld instrument perfectly matched for most testing applications.  It is equipped with an integrated camera for image acquisition.  This instrument is also sealed against moisture and dust.

The Schneider Electric LC1 D line of contactors and overload relays offer high reliability with long mechanical and electrical life and the most complete line of accessories in the industry. They are unique from any other contactors as the 40-80 AMP contactors offer two pre-installed base mounted auxiliary contacts thus reducing the need for additional auxiliaries and in turn reducing size and complexity.

The Fujikura 90S+ is a fusion splicer designed for high-speed, low-loss fiber optic splicing. It is an advanced tool that allows for quick, accurate and reliable splicing of single mode and multimode fibers.

Product Overview