Search results for: 'data in'

Complete Pruftechnik ROTALIGN Ultra kit with Shaft Alignment Advanced license, ROTALIGN sensor and laser, Bluetooth module, chain and magnetic bracket sets, cables, software, and ABS transport case.

Thermo Scientific Niton XL2 800 handheld X-ray fluorescence analyzer for nondestructive metal analysis with General Metals and Precious Metals modes. Also includes Metals Pass/Fail and Spectral FingerPrint functions for alloy identification, precious-metal analysis, and material sorting workflows.

The ABB AI845 Analog Input Module (3BSE023675R1) is a high-performance, 8-channel module designed for precise and reliable analog signal acquisition in industrial automation systems. Featuring HART communication support and factory-sealed quality, it ensures seamless integration and long-lasting operation. Upgrade your control system today—order the ABB AI845 module now!

Microprocessor controlled Large LCD display with shuffle knob design Alumina ceramic heating element for fast heat recovery 3 data memories to save commonly used temperatures USB 5V/1A power output Auto sleep, wake, and power-off functions Input Voltage AC 110~120V 60Hz Control System Microprocessor-controlled Power Consumption 60W Display LCD 73mmX40mm, Backlight Temperature Range 200~480°C / 392°F~896°F Temperature Calibration 100~699°C (212~1290°F), Adjustable Temperature Stability ±2°C/±36°F (no load) Heating Element Alumina ceramic Sleep Mode OFF/1-240min adjustable Output Voltage 24VAC Temperature of Sleep Mode 200°C/392°F USB Port Output DC 5V/1A Memory 3 sets Tip-to-Ground Resistance/Potential ≤2Ω/≤2mV Size 7.1 x 5.9 x 4.2 inches Weight 4.6 lbs Certificate TUV, RoHS

Schneider Electric APC SMT1000C 1000VA/700W line-interactive UPS with sine-wave output, SmartConnect cloud monitoring, LCD interface, automatic voltage regulation, and 8 NEMA 5-15R outlets.

Emerson Ovation 1C31132G01 is an analog output personality module designed for four-channel Ovation analog output subsystems, routing field signals for 0-5 V, 0-10 V, and 0-20 mA output configurations.

TDK-Lambda NNS30-15 linear AC/DC power supply with 15V DC output at 3.4A and 51W max power. NN Series unit with selectable AC input ranges, low ripple, remote sense, remote programming, and convection cooling.

The INNO Instrument A3 is a clad alignment arc fusion splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fiber types. It features a 4.3-inch color LCD touch screen, active 4-motor alignment, and quick 7-second splice time in SM mode. This new kit configuration includes the V1 fiber cleaver and standard accessories for field deployment.

Single Fluke DTX-MFM2 multimode fiber module for 850/1300 nm dual-fiber loss and length testing. Supports SC output, interchangeable adapters, VFL, and FindFiber functions.

Achieve perfect antenna alignment every time with the VIAVI 3Z Telecom RF Aligner RFA1000-fast, precise, and GPS-powered! Ready to boost your network? Get yours today!

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.

Rohmann ELOTEST M2 LS V2 portable eddy current flaw detector with M2-LS Base Unit for Lift-Off Suppression. Firmware 2.10, dual-frequency operation, and M2-N14 analog architecture for reliable surface and subsurface inspection.

The EXFO MaxTester 730C is a handheld singlemode OTDR configured for 1310 and 1550 nm fiber testing. This unit includes an installed PM-MAX-2X power meter hardware module and RF capability with Wi-Fi and Bluetooth for combined OTDR and power measurement.

Pitot Tubes Specifications

Pitot Tube Specifications

Pitot Tube Specifications

The C555 Concrete Moisture Meter provides fast, non-destructive preliminary moisture measurements on smooth, firm concrete to help pinpoint problem areas and determine where to place Rapid RH® L6 Smart Sensors.

Laser output is class 3A (around 3~5 mW) Maximum operation distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Continuous wave output mode for steady fault illumination Pulse mode locates faults under high ambient light Support 2.5mm connectors (for PC/FC/SC/ST) The button switch permits easy one handed operation Handy, pocket pen design 50 hours of continuous operation Requires 2 AAA batteries (not provided)

Pitot Tube Specifications

Fluke Networks SRC9SCAPCLCAPC.3MM singlemode 0.3 m TRC protects OTDR ports with SC/APC to metal LC/APC connectors, delivering precise, reference-grade fiber testing.

Unlock the potential of your fiber optic projects with the Fiber Optic Tool KIT Model OTK-1. This comprehensive set includes a Mini Optical Power Meter OPM-70, capable of measuring up to +10dBm, and a 30mw VFL fault finder, designed for quick and easy troubleshooting. The kit comes complete with essential accessories such as a precision fiber cleaver, aramid scissors, wire stripper, and much more, ensuring you have everything you need at your fingertips. Compact and lightweight, this new tool kit is perfect for professionals and enthusiasts alike. Elevate your fiber optic capabilities today!