Search results for: 'it's'

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Gould Modicon B803 is a discrete input PLC module for Modicon 800 Series controller platforms. It provides eight isolated 115 VAC input points used to translate field-level ON/OFF signals into logic states readable by the PLC CPU in industrial automation systems.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

The Balluff BFO-48G-DSV-SC-1 is a glass fiber optic cable designed for use with a separate fiber optic base unit. It supports diffuse reflection sensing in side-view configurations and is suited for industrial detection tasks in harsh environments.

The Molex 1300140037 is a 7-pole female circular connector pigtail designed for industrial electrical connections. It features a straight orientation, front panel mount configuration, and a 1/2-14 NPT mounting thread. The assembly is terminated with UL 1015 16 AWG lead wires and housed in a zinc die-cast body with black epoxy finish for durability.

The Honeywell 620-0088 Parallel Link Driver Module is a communication module for the Honeywell IPC 620 PLC system. It supports parallel data transfer between compatible IPC 620 processors and connected system components and is used within industrial control, communication, and monitoring architectures.

The Gates 32CFHS G60899-0032 is a Code 61 SAE J518 split flange set used in high-pressure hydraulic systems. It is designed to connect ports directly to hoses and resist shock loads and vibration. The set includes two flange halves, an O-ring, and Grade 8 mounting hardware.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

The Bussmann JKS-40 is a Class J fast-acting, current-limiting fuse rated at 40 A and 600 Vac. It is designed for rapid response to short-circuit conditions in industrial and commercial electrical systems requiring high interrupting capacity.

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.

Fluke Networks 11289400 soft case stores and protects telecom tools with a durable fabric body, zippered closure, and organized layout for contractor kits.

The Fluke Networks 25501004 TS25D test set features a 346A plug, high-impedance monitor mode, caller-ID, polarity and voltage indication, tone/pulse dialing and a rugged field design. It is suited for installing and maintaining voice-grade telephone lines.

Fluke D814 Punchdown Tool: Durable telecom impact tool with adjustable spring, blade storage, and precise low/high impact wire termination.

Fluke Networks MRC-50-SCSC multimode fiber optic cord for 50µm SC/SC fibers, reliable connectivity, and precise network testing.

Fluke Networks USB Interface Cable ensures fast, reliable data transfer between USB-A and Micro-B devices with durable copper conductors.

Fluke Networks D914 Impact Tool ensures precise network terminations with built-in hook, spudger, and ergonomic design for easy handling.

Fluke Networks fiber optic cable for multimode SC/SC connections, 62.5µm, ideal for precise testing and fast network data access.

Fluke MPO Network Cable: 1m SM MPO/APC connectivity, Type A polarity, reliable performance, and full compatibility with network devices.

Fluke Networks MS2-WM: Reliable MicroScanner² wiremap adapter for copper cable testing, detecting faults and ensuring accurate network diagnostics.

Fluke Cat 8 Network Cable: High-speed 40GBASE-T testing with RJ-45 connectors for switches, patch panels, hubs, and network devices.

Fluke singlemode fiber optic cable delivers precise SC/APC to E2000/APC connectivity for reliable network testing and seamless device integration.

Fluke 62 MAX IR Thermometer: Rugged, accurate, and drop-tested with wide temperature range and IP54 rating for harsh environments.