Search results for: 'it's'

General Electric 546A301G053 contact kit delivers 4-pole renewal capability for NEMA Size 1 magnetic contactors, supporting reliable electrical continuity and restoration of control equipment performance.

Control Devices Style 260 is a 2 in. Dry Link dry disconnect adapter for bulk fluid transfer systems. It serves as the fixed adapter half of a dry disconnect coupling assembly used where controlled connection and separation are required.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

The Ovation 5X00226G03 is an I/O Interface Module designed for use within Ovation DCS systems. Manufactured by Emerson, this module supports industrial control applications and is identified under model number 5X00226G03. Product weight is 0.34 kg with listed dimensions of 12.1 × 5.2 × 16.6 cm.

The Amprobe ULD-405 Ultrasonic Leak Detector is designed to locate ultrasonic sound generated by air and gas leaks in mechanical and electrical systems. Featuring a 2.5" LCD display with bargraph and adjustable receiver sensitivity, it converts high-frequency ultrasound into audible signals for precise leak pinpointing in compressed air systems, valves, piping, motors, and HVAC equipment.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

The Fluke 52 II dual probe digital thermometer measures two contact temperature inputs simultaneously using J, K, T, or E-type thermocouples. It provides laboratory accuracy, a large backlit display, and MIN, MAX, and AVG tracking for professional temperature measurement.

Fluke I40S-EL AC clamp-on current transformer for low current measurement up to 40 A. Designed for accurate readings on 1 A and 5 A secondary current transformers with a compact clamp profile.

The Curtis Industries CUS8 is an 8-pin octal relay socket base designed for industrial control applications. Rated at 10A and up to 300V, it provides a standardized receptacle for compatible 2PDT octal relays or timers and supports secure screw-terminal wiring.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

The Telemotive E7150-1-B is a radio remote control receiver module used in industrial wireless control systems. It functions as the fixed receiving unit that interprets signals from a paired handheld transmitter to control machinery. The module operates as part of a Telemotive radio control system and includes diagnostic indicators for system monitoring and troubleshooting.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

The Square D 9007C54A is a heavy-duty industrial limit switch designed for position sensing in automation and machinery applications. It features a rotary actuator with spring return operation, a rugged metal housing, and electrical ratings up to 600 V and 10 A. UL and CSA markings are present on the unit.

Pomona 1325-0 solderless stackable banana plugs feature set-screw assembly, gold-plated connector body, and support 22–18 AWG wire for custom leads.

Fluke 80AK-A adapts Type K thermocouples to multimeters using dual banana plugs, enabling accurate temperature measurements across supported Fluke meters.

Fluke 80PK-11 probe offers hands-free HVAC temperature monitoring with a flexible Velcro cuff and Type-K compatibility for routine maintenance checks.

Fluke 700TC2 plug kit enables secure termination of J, K, T, E, R, and S thermocouple wires for reliable connection to process calibrators.