Search results for: 'news'

The PLS 5R is a self-leveling five-point red laser level designed for layout, alignment, and squaring tasks. It projects plumb, level, and square reference points and features a pendulum lock for transport and tilt mode operation. Supplied as a bare tool with pouch and battery pack.

The PLS 3G KIT is a self-leveling 3-point green laser level designed for fast plumb reference layout. It projects up, down, and forward points with ≤1/8 in accuracy at 30 ft and includes mounting accessories for floor, wall, and magnetic attachment applications.

The Fluke Networks TRC-SM-VERIFY-MMC24P is a reference-grade single-mode verification test reference cord designed for testing pinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It supports verification that the test reference has been set correctly using reference-quality fiber and connectors.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks MRC-50EFC-SCLCKITM is a multimode 50 µm Encircled Flux compliant test reference cord kit for optical loss measurements. The kit includes four 2 m reference-grade cords with metal LC connectors, designed for use with the Fluke CertiFiber Pro fiber tester.

The Fluke 179 True-RMS Digital Multimeter Electronics Kit supports electrical and electronic troubleshooting with voltage, current, resistance, frequency, capacitance, continuity, diode, and temperature measurements. The kit includes SureGrip accessories, a magnetic hanger, and a soft carry case for organized field use.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Allen-Bradley 700-HK36A1 is a Bulletin 700-HK slim line plug-in relay with a 120V AC coil and SPDT contact configuration. It supports up to 16 A resistive loads and is designed for high-density industrial control and interposing applications.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

Cornell Dubilier 677-9344 CGS342T350X5L is a CGS-series aluminum electrolytic capacitor rated at 3400µF and 350VDC. It features screw terminals, chassis mounting, and is designed for high current filtering or energy storage applications.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

The Fluke Networks FTK2000 SimpliFiber Pro kit is a singlemode fiber verification solution combining an optical power meter with a 1310/1550 nm laser source. It supports fast power and loss testing for installed fiber links and includes essential accessories in a portable carrying case.

Fluke Networks FTK1200 is a SimpliFiber Pro multimode fiber verification kit with VisiFault. The kit includes an optical power meter, 850/1300 nm multimode source, FindFiber Remote ID source, magnetic straps, adapters, and a carrying case.

The Fluke PTi120 is a rugged pocket thermal imager designed for industrial inspection. It features a fully radiometric 120 x 90 infrared sensor, 3.5-inch LCD touchscreen, IR-Fusion™ imaging, and a -20 °C to 150 °C temperature measurement range in a compact, portable form factor.

The Fluke 971 Temperature Humidity Meter is a handheld instrument for measuring air temperature, relative humidity, dew point, and wet bulb temperature. It features a backlit dual display, 99-point data storage, Min/Max/Avg functions, and a quick-response capacitance sensor for indoor air quality assessment.

The Fluke 729 Pro 7M Automatic Pressure Calibrator is a portable calibrator with an internal electric pump for automatic pressure generation and regulation up to 1000 psi. It supports pressure calibration, pressure measurement, voltage measurement, and mA sourcing with built-in HART communication.

Fluke Networks REMOTEID-KIT enables fast remote cable identification with MicroScanner PoE testers. Includes numbered IDs #2–7 for tracing RJ45, Ethernet, telephone, and CATV cabling layouts.

Fluke Networks TRC-MPO-UU-B MPO to MPO fiber optic test cord delivers reliable Type B polarity connectivity for MultiFiber Pro optical power meters and fiber test kits.