Search results for: 'instandgesetzt'

Philips Advance ICN-2P32-N Centium ballast delivers quiet, energy-efficient instant start operation for 1 or 2 F32T8 lamps in 120–277V commercial fixtures.

The Eagle Eye IBEX-Temperature Probe-IR is a temperature probe accessory designed for use with IBEX battery testing equipment. The probe connects via cable and supports temperature measurement during battery testing and diagnostic procedures.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

GE TED134030 breaker delivers reliable 30A thermal-magnetic protection for GE Spectra E150 systems, ensuring safe, high-performance operation in 480V applications.

AEMC 2140.45 color-coded input ID marker set supports clear input identification for compatible PowerPad and PEL series power instruments.

The AEMC 2138.54 Continuity Probe extends continuity testing for compatible AEMC testers and megohmmeters, providing greater reach for electrical maintenance and troubleshooting.

Fluke Networks JR-LEV-2-H replacement blade head supports Leviton Cat 5e and Cat 6 jacks for fast, precise JackRapid punchdown termination.

Fluke Networks JackRapid tool delivers fast, precise jack terminations with one-handed operation, cutting excess wire instantly for clean installs.

YSI 556 MPS handheld multiparameter water quality meter with probe and field cable for dissolved oxygen, conductivity, temperature, pH, and ORP measurement.

Square D SN0610 insulated groundable neutral assembly kit for 60A/100A heavy-duty safety switches, compatible with Class 3110 F5/F6 Series.

INNO Instrument PTB01 is a single-phase wiring test adapter box used for switching single-phase circuits to support power coefficient measurement and related electrical testing workflows.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

General Electric THQL2120 delivers reliable 20A, 2-pole protection for GE Q-Line load centers. Ideal for residential circuits and 240V equipment with plug-in installation.

GAI-Tronics 411A speaker mounting bracket assembly for wall mounting and positioning compatible speaker hardware, with bracket, adapter, conduit pipe, elbow, and gasket.

Wöhler TF1 is a Type K surface temperature probe built for fast, accurate surface temperature measurement on compatible Wöhler analyzers and meters, with a measuring range up to 932 °F.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.