Search results for: 'integrated'

Fluke 721-3630 dual-sensor calibrator offers 36 and 3000 psi ranges, 0.025% accuracy, mA measurement, and RTD temperature input for custody transfer applications.

Fluke Networks 11231255 coax stripper delivers precise 2- and 3-level stripping with adjustable blade depth for RG58/59 and other coax cable applications.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

Westinghouse 9966D75G01 IQ Data Plus II power monitoring display delivers three-phase electrical measurement including amps, volts, watts, power factor, and energy data for digital metering systems.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

Fluke FLUKE-CV401 is a 4 in (95 mm) ClirVu® infrared window with security key door latch for electrical inspection applications. It features AutoGround™ integrated grounding, IP67 environmental protection, and arc testing to 63 kA per IEEE C37.20.7 at KEMA.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Eagle Eye Power Solutions SLB-Series Smart DC Load Bank Standard delivers programmable constant current battery discharge testing with integrated monitoring, data logging, and wide standard voltage coverage from 10V to 576V.

The Megger MJÖLNER 200 is a portable micro-ohmmeter high current system integrated into a rugged hard case with on-board display and controls. The front panel provides DC+ and COM terminals, dedicated sense inputs, shunt output, current clamp input, and labeled interface ports for field testing configurations.

The Fluke 810 Vibration Tester is a handheld diagnostic instrument for identifying mechanical vibration faults in rotating equipment. Using tri-axial measurement and on-device analysis, it reports fault type, location, and severity during field testing.

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

The ABB 1SVR427014R0000 CP-S 24/5.0 is a 120 W DIN rail switch mode power supply delivering 24 V DC at 5 A. Designed for industrial environments, it supports wide AC and DC input ranges, adjustable output voltage, high efficiency, and integrated protection features for reliable system power.

Fluke 729 150G FC automatic pressure calibrator delivers hands-free pressure generation, HART communication, mA measurement, and Fluke Connect compatibility.

Allen-Bradley 1492-UF824 fusible terminal block provides compact DIN-rail circuit protection with LED blown-fuse indication for low-voltage AC/DC control and PLC applications.

Allen-Bradley S50411-002 dynamic brake board enables controlled motor deceleration by managing regenerative energy through external brake resistors in compatible 1305 variable frequency drives.

Allen-Bradley 100S-C72DJ14C safety contactor delivers 72A IEC switching with mechanically linked contacts and a 24V DC diode-suppressed coil, providing reliable feedback for safety-related control circuits.

Allen-Bradley 100-C12D10 contactor with 193-EA1DB E1 Plus overload relay provides IEC motor switching with electronic overload and phase-loss protection for reliable industrial motor control.

The Rigaku KT-100 is a handheld LIBS analyzer designed for rapid alloy identification and elemental analysis of industrial metals. This configuration includes permanent, transferable calibration matrices covering stainless steels, low alloy steels, aluminum grades, titanium, cobalt, nickel, and copper.

Thermo Scientific Niton XL3t 700S handheld XRF analyzer for nondestructive elemental analysis across metals, plastics, soils, and electronic materials, with multi-application modes including mining, electronics, consumer goods, and car catalyst mode.