Search results for: 'control'

Fluke TS19 Test Set: Reliable network testing with open/short circuit detection, tone operation, polarity check, and monitor mode for safe diagnostics.

The Wöhler VIS 500 (11304) is a professional video inspection system with detachable Ø 1.5″ pan-and-tilt and Ø 1″ miniature camera heads, plus centering accessories for improved guidance in pipes. Ideal for precise inspections in wastewater, duct, and exhaust applications.

Wohler VIS 350 PLUS L200 (8931) is a professional push-rod video inspection system with a 100 ft cable, pan & tilt camera heads, wide 7″ color display, video/photo recording, and an integrated L 200 locator — perfect for inspecting sewer, drain, duct, and ventilation lines on site.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Fluke Networks TRC-MPO-UU-B MPO to MPO fiber optic test cord delivers reliable Type B polarity connectivity for MultiFiber Pro optical power meters and fiber test kits.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Fluke TL1550B test lead set provides secure probe-to-clip connections for insulation testing. Designed for Fluke 1550B MegaohmMeter use with red, black, and green leads for reliable measurements.

Pomona 5698 Universal Adapter Kit enables custom RF adapter configurations using SMA, BNC, TNC, and N interfaces. Designed for flexible signal interconnection with precision RF connectors.

Fluke Networks SRC-9-SCSC-KIT is a singlemode SC/SC test reference cord kit designed for accurate fiber testing with Fluke Networks testers. Includes four 2-meter SC-terminated reference cords.

Fluke Networks TRC-SM-VERIFY-MPO12P is a reference-grade single-mode MPO12 verification cord for CertiFiber Max systems, ensuring accurate reference validation for pinned MPO Type A fiber testing.

Fluke 80PK-1 Type K beaded thermocouple probe delivers fast-response air and surface temperature measurement using a miniature connector. Designed for general-purpose diagnostics with compatible Type K instruments.

Fluke TL175-HV TwistGuard test leads deliver high-voltage current measurement with CAT III 1500V safety, adjustable 2mm probe tips, and heavy-duty construction for reliable multimeter testing.

Pomona 3752 shielded miniature aluminum box with integrated BNC male-to-female connector. Designed for 50-ohm signal routing, shielding, and test circuit enclosure in RF and instrumentation setups.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

Fluke AC173 alligator clip set delivers secure electrical connections for 4 mm banana plug test leads. Designed for modular Fluke leads, it supports safe, hands-free measurements in demanding electrical environments.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

Pomona 3789 BNC Male to Minigrabber Test Clip breakout cable enables fast, reliable signal access from BNC jacks to minigrabber clips for precise electronic testing and troubleshooting.

Pomona 5830-0 Flexible Maxigrabber Test Clip delivers secure electrical testing with a rotating pincer contact and standard banana jack termination. Designed for custom leads using 18–22 AWG wire.

Pomona 4290 SMA Male to BNC Female adapter enables reliable 50-ohm RF signal interconnection for test equipment, antennas, and cables, using gold-plated contacts for consistent performance.

Fluke 750P03 differential pressure module delivers precise 0–5 PSI calibration and measurement when paired with compatible Fluke calibrators, offering digital accuracy, temperature compensation, and stable reference performance.