Search results for: 'fiber tools'

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

Fluke Networks QC-MMC-12-24-5P QuickClean cleaners provide fast, reliable cleaning for 12–24 MMC fiber connectors. Pack of five for field and lab maintenance.

Fluke Networks SRC-9-SCST: 2m singlemode fiber optic test cord with SC/ST connectors for accurate optical testing and dependable network performance.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

Fluke Networks FiberLert-125 6P live fiber detector enables fast non-contact verification of active fiber signals, polarity, and connectivity across 850–1625 nm.

Fujikura FSM-50R12 ribbon fusion splicer delivers fast 12-fiber ribbon splicing with auto arc calibration, rapid sleeve heating, dual-view monitoring, and CT-30 plus HJS-02 tools for precise ribbon preparation.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

Fluke LinkIQ LIQ-DUO-KIT-1475 Cable+Network and Fiber Test Kit with IntelliTone Pro 200 – Combines 10G copper testing, fiber inspection, and cable tracing for a complete copper/fiber verification solution.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Fluke Networks FI1000-ADAPT-60 adapter adds a 60° angled camera tip for improved inspection access. Ideal for technicians working with tight or hard-to-reach fiber ports.

Fluke Networks FI-3000TP MMC ADP adapter tip enables MMC patch cord inspection with the FI-3000 FiberInspector, featuring a lead-free design and RoHS-compliant build.

Laser output is class 3A (around 3~5 milliwatt) Maximum opereration distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Three operation modes available: "CW" (Continuous wave output), "Pulse" and "Off" modes Continuous wave output mode (CW) for steady fault illumination Pulse mode helps to locate faults under high ambient light conditions Support LC 1.25mm connectors The button switch permits easy one handed operation Handy, pocket pen design 2 AAA-size alkaline batteries provide 50 hours of continuous operation

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Fluke DSX2-8000MI CableAnalyzer Kit – Certifies Cat 8/Class I & II copper with Level 2G accuracy and performs Tier-1 multimode fiber testing with CertiFiber Pro OLTS. Versiv platform ready for future expansion.

Viavi T-BERD 2000 DWDM: Advanced fiber testing solution with built-in power meter, VFL, and 9-hour battery. Boost productivity with smart, fast, and reliable field testing.

The Fluke Networks FI-525 FiberInspector Micro combines a high-resolution handheld inspection scope with autofocus, built-in PortBright illumination for dark panels, and a full fiber-end-face cleaning kit—ideal for single-mode and multi-mode fiber verification and maintenance.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

AFL OFI-400 Fiber Identifier: Detect live fibers fast with 10,000+ tests. Rugged, lightweight, and perfect for seamless optical signal analysis!

Fluke Networks MRC-625-EFC-SCLC-M TRC delivers 62.5 µm multimode EF-compliant testing with SC to metal LC connectors for precise optical loss measurements.