Search results for: '000 000'

Fluke LVD2 detects AC voltage from 90 to 600 V with dual sensitivity and LED flashlight. Safe CAT IV 600 V rating for industrial and commercial use.

AEMC 6422 Digital Ground Resistance Tester Kit 150ft: Fast 3-point testing with auto-ranging, large LCD, and battery-powered portability.

Allen-Bradley 855T-B24DN3 delivers crisp green visual signaling in a 70 mm Control Tower stack light format with 24V AC/DC steady incandescent operation.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Fluke V3000 FC Wireless AC voltage module measures up to 1000 V true-RMS and logs data wirelessly using Fluke Connect for real-time sharing.

Fluke 190-102-III CAL ScopeMeter combines a 100 MHz oscilloscope and DMM with CAT IV safety, deep memory, and traceable calibration for industrial use.

The Fluke PRV240 is a portable, battery-powered proving unit that supplies a stable 240 V AC/DC source to verify multimeter and tester operation before and after energized work. It helps meet safety requirements, reduces risk, and ensures instruments are functioning properly in the field.

Fluke FLK-3000FC HVAC kit offers wireless multimeter and clamp measurements, remote monitoring, and logging for fast HVAC troubleshooting and safer testing.

The Fluke Networks TS52 PRO (52801004) brings the TS52 series reliability to a configuration with a 346A plug interface. It features a back-lit LCD, glow keypad, and DataSafe high-impedance monitoring—designed for line testing in telecom installations.

Fluke 922 Airflow Meter measures HVAC pressure, velocity, and airflow with bright display, color-coded hoses, and precise 0.001 in H2O resolution.

Fluke ScopeMeter: Rugged oscilloscope for industrial waveform analysis with LCD, USB, Wi-Fi, and rechargeable Li-Ion battery for field use.

Amprobe TIC 300 PRO: MSHA-certified, non-contact voltage tester with VolTect™ alert for safe detection from 30 VAC to 122 kV in industrial and utility use.

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

The Sauermann SICA 2306NDSH gas analyzer supports O₂, CO, NO, NO₂, SO₂, and H₂S measurement with CO dilution auto-range to 50K ppm for combustion and emissions analysis workflows.

Siemens 3RH1131-1AK60 contactor relay delivers 3NO+1NC switching in a compact SIRIUS S00 format with a 110V 50 Hz / 120V 60 Hz AC coil and screw-terminal connection for control circuit integration.

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

The INNO Instrument VIEW 3X is an Active V-Groove Cladding Alignment Fusion Splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fibers. This standard OEM kit includes the V12 cleaver and integrated heater, with embedded IoT, GPS, and View Pro Manager cloud connectivity for project and device management.

INNO Instrument M7+ compact fusion splicer kit with Active V-Groove cladding alignment and a 4.3" full-touch display. Supports single-fiber SM/MM/DS/NZDS splicing, quick splice/heating cycles, and data output via USB-C or View Pro Manager cloud.