Search results for: 'Locator'

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

The Fluke Networks TS54-A-09-TDR integrates TDR, toner, pair-identifier and telecom test set in one rugged unit. Locates faults up to 3,000 ft, supports twisted pair/coax/parallel conductors and features field-ready protection for harsh environments.

Schneider Electric 750XCXH-120A is an 11-pin octal plug-in power relay with a 120 VAC coil and 3PDT contact form. Designed for general-purpose and hazardous-location applications, it features silver alloy, gold-flashed contacts and continuous-duty operation.

The Buckleys Wet Roof Pro2 is a flat roof leak detector kit designed to locate leaks in wet, non-conductive roofing membranes. It uses electrical current flow through surface moisture to pinpoint faults and also includes a wet sponge mode for testing upstands and other vertical surfaces.

Laser output is class 3A (around 3~5 mW) Maximum operation distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Continuous wave output mode for steady fault illumination Pulse mode locates faults under high ambient light Support 2.5mm connectors (for PC/FC/SC/ST) The button switch permits easy one handed operation Handy, pocket pen design 50 hours of continuous operation Requires 2 AAA batteries (not provided)

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

Elcometer 331 TH Deep Cover Concrete Covermeter & Half Cell Gauge for reinforced concrete surveys requiring rebar location, cover depth measurement, bar sizing, and TH linear/grid data logging.

The Amprobe AT-6010 Advanced Wire Tracer Kit is designed to trace energized and de-energized wires, identify breakers and fuses, and locate shorts or opens. The kit includes a receiver with large LCD display and transmitter supporting operation up to 600 V AC/DC in CAT III environments.

Fluke FLK-II500 acoustic imager lets technicians visualize sound to locate gas and vacuum leaks fast with 2–52 kHz detection and a 7-inch touchscreen display.

The Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe combines digital and analog toning to trace and locate copper cables on active or inactive networks. It features visual LED indicators, RJ11/RJ45 adapter cables, and automatic shut-off for efficient field use.

Vega D5.1/2.N Ex d Stopping Plug seals unused 1/2-14 NPT entries in hazardous-area enclosures with nickel plated brass construction, flush external installation, and certified flameproof protection.

Hubbell Killark ENY-4TM 1-1/4 in Duraloy iron explosion-proof sealing fitting with nipple for vertical or horizontal conduit in hazardous locations.

The Fluke II905/SB140/FPC3 is an industrial acoustic imaging leak detector kit that pairs the II905 Acoustic Imager with the SB140 Sound Beacon and 3 years of Premium Care. It visually locates and assesses compressed gas, vacuum, and other ultrasonic leaks using a 7″ LCD touchscreen and LeakQ™ analysis to help teams quickly find, size, and document leaks

The Fluke LIQ-DUO-KIT-3PK includes three LinkIQ Duo tester kits, each providing 10 Gb/s cable testing, switch diagnostics, PoE verification, and Wi-Fi analysis. This multi-unit bundle supports standardized tools across technician teams and multi-site operations.

Fluke Networks MicroScanner2: Industrial Ethernet verifier with fast continuity, wiremap, and fault location to reduce downtime and ensure cable reliability.

The Fluke MS-POE verifies Ethernet cabling and Power-over-Ethernet in one step. It identifies PoE class, voltage, and pairs while testing cable length, wiremap, and network speed—ideal for installing and troubleshooting PoE devices like IP cameras, phones, and access points.

Fluke IntelliTone Pro 200 Tone Generator and Probe: Accurately trace and locate twisted pair, coax, and cable runs with digital and analog signaling. Ideal for network technicians needing reliable cable tracing in active networks.

Fluke PRO3000 Analog Probe: Loud tone detection through walls with adjustable volume and quick-twist tip for easy replacement.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.