Search results for: 'clears'

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3‑Wire, 120Volt AC.

The PLS 180R cross line red laser level provides horizontal and vertical laser reference for layout and installation tasks. It features a 180° horizontal fan angle, 130° vertical fan angle, self-leveling operation, pendulum lock, and IP54-rated enclosure for job site use.

The PLS 3G Z is a self-leveling three-point green laser level designed for fast, accurate plumb layout. It delivers ≤1/8" accuracy at 30 ft and features a pendulum lock for controlled alignment. Includes laser, canvas pouch, and BP5 alkaline battery pack.

The Allen-Bradley 800B-ALB5 is a yellow, square lens cap with diffuser designed for Bulletin 800B 16 mm operator devices. It provides consistent color indication for push buttons and pilot lights in compact control panels and instrumentation applications.

Fluke Networks PROBE TIP 1.25 MALE slim probe tip enables clear inspection of 1.25 mm MDC and SN ferrules using FI-3000 or FI-1000 cameras.

Fluke Networks FI1000-E2K-TIP video probe tip enables E2000 bulkhead inspection with OptiFiber Pro OTDR for precise, reliable fiber analysis.

Fluke Networks FI-500TP-AFCF adapter tip enables precise inspection of FC APC fiber connectors with the FI-500 FiberInspector Micro for reliable performance.

Amprobe LM-100 Light Meter: Portable digital meter for precise lux and footcandle measurements, ideal for efficient lighting analysis and energy optimization.

Fluke Networks modular adapter enables quick, non-intrusive telephone line testing with 4-wire access, RJ-11/RJ-45 compatibility, and secure copper contacts.

Fluke Networks FI1000-SCFC-TIP probe tip for SC and FC bulkheads, designed for OptiFiber Pro OTDR to ensure precise fiber inspection.

Fluke Networks fiber optic test cable delivers precise singlemode SC/SC APC connectivity, ensuring reliable performance for network devices.

The Amprobe LCR55A delivers precise capacitance, resistance, inductance, transistor, and diode testing with a large LCD display and user-friendly plug-in test slots.

Pomona 2249-C-72 Antenna Cable: 6 ft BNC cable with molded strain relief, PTFE insulation, and gold-plated contacts for noise-free, reliable connections.

GAI-Tronics 12511-001 is a dynamic noise-canceling transmitter replacement kit for compatible handsets in industrial paging systems. The kit includes the transmitter element and replacement cap and is identified as a replacement for legacy part 12511-007.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Fluke 3PHVL-17XX-5M is a 3-phase + neutral voltage test lead cable assembly designed for structured multi-phase measurements, delivering organized lead management and reliable electrical connectivity over a 5 m length.

Fluke Networks REMOTEID-1 Replacement Remote ID wiremapper enables accurate Ethernet cable identification and wire mapping when used with LinkIQ Cable+Network Testers.

Fluke TP80 electronic test probes provide insulated IC-safe probing for dense circuit boards. Designed for use with Fluke TL222 and TL224 leads, offering controlled access to compact electronic test points.

Fluke 9MM/20M videoscope probe delivers extended 20 m inspection reach with a forward view camera for DS701 and DS703 FC inspections.