Search results for: 'left the'

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

The Megger MJÖLNER 200 is a portable micro-ohmmeter high current system integrated into a rugged hard case with on-board display and controls. The front panel provides DC+ and COM terminals, dedicated sense inputs, shunt output, current clamp input, and labeled interface ports for field testing configurations.

The VeEX FX150 is a handheld optical time domain reflectometer configured with 1310 nm and 1550 nm singlemode wavelengths. The platform is capable of OTDR measurement, event analysis, trace review, and bundled Optical Power Meter (OPM), Optical Light Source, and Visual Fault Locator (VFL) operation for fiber testing workflows.

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

The Thermo Scientific Niton XL2 is a handheld X-ray fluorescence (XRF) analyzer designed as a configurable platform for non-destructive elemental analysis. It supports alloy analysis, consumer goods screening, mining, and environmental applications depending on enabled detection modes.

The INNO Instrument VIEW 3X is an Active V-Groove Cladding Alignment Fusion Splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fibers. This standard OEM kit includes the V12 cleaver and integrated heater, with embedded IoT, GPS, and View Pro Manager cloud connectivity for project and device management.

INNO Instrument M7+ compact fusion splicer kit with Active V-Groove cladding alignment and a 4.3" full-touch display. Supports single-fiber SM/MM/DS/NZDS splicing, quick splice/heating cycles, and data output via USB-C or View Pro Manager cloud.

Certified pre-owned Olympus DELTA DP-2000 handheld XRF analyzer with Alloy Plus and Window Guard modes. Designed for fast alloy identification and material verification. Includes rechargeable batteries, docking station, AC adapter, software disc, and hard transport case. Function-tested and field-ready. Live Chat or call 1-833-322-7865.

Trend Networks LanTEK IV-500 R163000 Certified Pre-Owned Cable Certifier Kit with CAT6A VisiLINQ Adapters, Fiber Inspection Microscope Support, Tone Test and TeamViewer Remote Control Tools. Includes Main + Remote Units and Carry Case.

Fluke MDA-550/FPC Motor Drive Analyzer: 4-channel, 500 MHz testing with guided setup, preset profiles, and built-in professional report generation.

Megger MIT525 insulation resistance tester applying DC test voltages to 5 kV for evaluation of electrical insulation in cables, motors, transformers, and switchgear. Supports IR, timed IR, DAR, PI, dielectric discharge, stepped voltage, and ramp tests with onboard memory and USB data transfer.

3M Dynatel 1420-iD EMS Marker Locator kit with Keson PA14. The 1420-iD locates underground EMS markers, reads and writes 3M iD markers, estimates marker depth, and supports dual marker frequency search with RS232/USB PC interface.

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

Rohde & Schwarz FSH-Z14 directional RF power sensor for FSH analyzers, supporting 25 MHz–1 GHz and 30 mW–300 W forward and reflected power with return loss and VSWR measurement accuracy.

The Olympus Omniscan OMNI-MX PA3218PR delivers advanced, high-speed phased array NDT with both remote control interface and multigroup support. Buy certified pre-owned from Cartoli—your trusted NDT partner. Call 18333227865 or chat live for the best deal!

The Thermo Scientific Niton XL2 GOLDD is a high-performance handheld X-ray fluorescence (XRF) analyzer engineered for demanding applications requiring fast analysis, low detection limits, and advanced elemental sensitivity, including light elements.

The Thermo Scientific Niton XL2 Plus is a high-performance handheld X-ray fluorescence (XRF) analyzer designed as a fully configurable platform for non-destructive elemental analysis. It supports demanding industrial, environmental, and precious metals workflows through selectable detection modes.

The Wöhler Viper S 8872 delivers flexible 50 ft reach for cleaning small chimneys, pipes, and ventilation ducts with a 0.18 in GRP rod, length marking, M5 stainless steel end pieces, and protection tube.

Introducing the **Evident Olympus OmniScan X3 32:128PR**, a cutting-edge phased array and ultrasonic flaw detector designed for unmatched performance in industrial inspection applications. This state-of-the-art instrument integrates advanced **FMC/TFM** capabilities, dual UT channels, and the ability to capture up to four simultaneous TFM groups, ensuring superior flaw detection and imaging. With its robust **IP65-rated enclosure**, this portable device is built to withstand challenging environments, making it perfect for weld inspections, corrosion mapping, and pipeline integrity assessments. The **10.6-inch resistive touch display** ensures clear, high-resolution imaging, while 64 GB internal SSD storage provides ample space for your data needs. Elevate your inspection capabilities with the comprehensive package that includes a **rechargeable battery**, AC adapter, wireless adaptor, and essential accessories. Get ready to redefine precision in ultrasonic testing with the **Evident Olympus OmniScan X3 32:128PR**. **Cost:** $45,001.11 **Condition:** New **Stock Status:** In Stock **Estimated Delivery:** 3 days