Search results for: 'full'

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

Made from high carbon steel Designed for precise assembling and adjustment on electronic circuits Provides for easy work on high density PC board

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.

Fluke 717 300G Pressure Calibrator provides -12 to 300 psi measurement with 0.05% accuracy, multiple pressure units, and rugged field-ready design.

The Fluke 1587/I400 FC pairs a full-featured 2-in-1 insulation tester and True-RMS digital multimeter with a 400 A AC current clamp. Designed for maintenance, motor-drive, and electrical system diagnostics, it offers insulation resistance testing, voltage/current measurements, and clamp-based AC current readings in a single kit

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

Fluke 700G29 pressure gauge calibrator measures up to 3000 psi with 0.05% accuracy, offering rugged, IP67 performance for fast, precise field calibration.

Fluke Networks CIQ-IDK57 Remote Identifier Kit enables full wiremap testing and fast identification of twisted pair and coaxial cable connections.

Fluke 750P08 pressure module converts your calibrator into a precision gauge pressure calibrator — 0-1000 psi range, digital output and high accuracy.