Search results for: 'levels'

Carlo Gavazzi CA18CLN12NA capacitive proximity sensor delivers adjustable 3–12 mm detection with 10–40 VDC operation, supporting reliable material detection across industrial automation and level sensing applications.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

E.I.L A-11536 delivers reliable 0–500 µA to 4–20 mA signal conversion for PLC/DCS systems, offering stable sensor integration and noise-resistant panel-mount operation.

The Gould Modicon B803 is a discrete input PLC module for Modicon 800 Series controller platforms. It provides eight isolated 115 VAC input points used to translate field-level ON/OFF signals into logic states readable by the PLC CPU in industrial automation systems.

AEG 029.044.297 PLC Control Module PC Board designed for integration within AEG programmable logic controller systems, providing internal control functionality in modular industrial automation environments.

York 031-00005-000 thyristor SCR module designed for HVAC power control circuits. Functions as a latching switch within York chiller and VSD control boards, ensuring stable electrical switching performance.

Fluke 810 Vibration Tester delivers on-board machine diagnostics with tri-axial vibration measurement and laser tachometer feedback, helping identify fault type, severity, and location in rotating equipment.

Allen-Bradley SP-122972 Feedback Board supports 1395 drive systems by processing drive feedback signals for stable operation in high-power industrial motor control environments.

Emerson Phoenix Contact 1X00102H01 is an Ovation DCS power distribution module that delivers protected 5V, 12V, and 24V DC power to controller and I/O modules with diagnostic support.

Opto 22 IAC5 AC input module provides rugged, optically isolated voltage and switch status sensing for G1 I/O racks in industrial control systems.

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

Turck BI10-G30SK-RZ3X2 inductive proximity sensor with 10 mm rated switching distance. M30 threaded, flush-mount metal housing with terminal chamber connection. Supports 20–250 VAC and 10–300 VDC operation with 2-wire NC output for industrial metal detection.

Fluke 805 FC Vibration Meter delivers accurate, repeatable machine and bearing health checks with severity-scaled readings and mobile app integration.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.

Schneider Electric AS-212P-010 Modicon discrete input module provides 12 PNP 24VDC inputs for legacy Modicon PLC systems, enabling reliable sourcing-signal interface from industrial sensors and switches.

Metso Automation IOP332 digital input module for Valmet control systems, designed to monitor 120V AC/DC binary field signals from industrial devices with reliable I/O processing and diagnostics.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

CSI Ultraspec B811701 Machinery Analyzer: Precision laser alignment system for shafts, ensuring optimal spin axis straightening. Reliable, durable, and ideal for industrial applications.

AEG Modicon PC-A984-130 is a compact PLC CPU delivering reliable Modbus control, 4K user logic memory, and fast 5 ms/k scan time for Modicon 984 automation systems.

Allen-Bradley 1336-SCR-SP3A Input SCR Power Module for 1336 Adjustable Drives. Designed for 460V AC line-side rectification in Frame D drives supporting 60–100 HP systems.