Search results for: 'terminal'

The Allen-Bradley 1734-TBS is a POINT I/O terminal base assembly with an 8-position spring-clamp removable terminal block. Designed for compact distributed I/O systems, it supports DIN-rail mounting, removable wiring, and compatibility with multiple POINT I/O modules.

Siemens TM-E15C24-01 terminal module for ET 200S provides secure spring wiring, supports pre-wiring, and pairs with all 15mm ET 200S electronic modules.

Allen-Bradley 1794-TB3 FLEX I/O terminal base provides 16 I/O wiring points with screw-clamp connections, integrated FLEXBUS backplane support, and DIN-rail mounting for FLEX I/O systems.

Allen Bradley 1734-MB provides reliable POINT I/O mounting w/ removable terminal block, DIN rail installation, and secure backplane connection for modular expansion.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

Banner RWB4 MAXI-BEAM wiring base provides a rugged 4-terminal foundation for mounting MAXI-BEAM sensor heads and power blocks, ensuring easy modular integration.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.

Allen-Bradley 1746-IA16-SERC Series C AC input module provides reliable 16-point 120VAC signal monitoring for SLC 500 systems, with isolation and LED status.

Allen-Bradley 1746-IA16 Series B delivers reliable 16-point 120V AC input capability for SLC 500 systems, with optical isolation, LED status, and easy wiring.

Emerson Ovation 1C31132G01 is an analog output personality module designed for four-channel Ovation analog output subsystems, routing field signals for 0-5 V, 0-10 V, and 0-20 mA output configurations.

Allen-Bradley SP-122972 Feedback Board supports 1395 drive systems by processing drive feedback signals for stable operation in high-power industrial motor control environments.

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

Turck BI10-G30SK-RZ3X2 inductive proximity sensor with 10 mm rated switching distance. M30 threaded, flush-mount metal housing with terminal chamber connection. Supports 20–250 VAC and 10–300 VDC operation with 2-wire NC output for industrial metal detection.

Allen-Bradley 1746-IG16 delivers reliable 5V TTL input monitoring for SLC 500 systems, providing fast response, optical isolation, and 16 discrete channels.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

Allen-Bradley 1771-RTP1 remote termination panel for PLC-5 systems simplifies analog field wiring, supports 1771-N modules, and enables cold-junction compensation for precise thermocouple measurements.

Allen-Bradley 1771-WA Series B provides reliable 10-terminal wiring for PLC-5 1771 I/O modules, supporting easy module changes and high-intent PLC wiring applications.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

The Allen-Bradley 700-HK36A1 is a Bulletin 700-HK slim line plug-in relay with a 120V AC coil and SPDT contact configuration. It supports up to 16 A resistive loads and is designed for high-density industrial control and interposing applications.

Square D ATV66U41N4 delivers reliable 3 HP motor speed control with 460V operation, Modbus communication, and adjustable frequency for industrial automation.

New Allen-Bradley 1756-IB32/B ControlLogix 32-Point 24V DC Digital Input Module for high-density DC signal interfacing in ControlLogix systems. Factory sealed, fast shipping, Cartoli support.