Search results for: 'from'

WAGO 750-402 digital input module delivers reliable 4-channel 24V signal acquisition with 3 ms filtering for WAGO 750/753 systems, ideal for industrial sensors.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

Automation Direct D4-08B-1 DL405 8-slot I/O base delivers reliable panel-mounted rack support for DirectLOGIC 405 PLC systems needing flexible modular expansion.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Ovation 5X00481G01 OCR1100 Processor Module is a controller Atom CPU module designed for industrial automation and control systems. It features an Intel® Atom™ D525 1.8 GHz processor, 2 GB DDR3 SDRAM, and 4 GB eMMC storage, operating on Windows Embedded Standard 7. The module supports extended temperature operation from -40°C to +70°C.

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.

Allen-Bradley 1772-SD2 remote I/O scanner enables PLC-2 processors to communicate with remote I/O racks, supporting up to 1792 I/O points with serial twinaxial connectivity and LED status indicators.

Metso Automation PDP401 Distributed Processing Unit for the maxDNA DCS, delivering core data acquisition, control execution, and processing within rack-mounted Metso automation systems.

Allen-Bradley 1771-RTP1 remote termination panel for PLC-5 systems simplifies analog field wiring, supports 1771-N modules, and enables cold-junction compensation for precise thermocouple measurements.

Allen-Bradley 1769-ECR delivers reliable CompactLogix bus termination for 1769 I/O banks, ensuring proper system detection and stable FlexBus communication.

Allen-Bradley 1771-WA Series B provides reliable 10-terminal wiring for PLC-5 1771 I/O modules, supporting easy module changes and high-intent PLC wiring applications.

The Emerson KJ2003X1-BK1 SD Plus Controller is a DeltaV series industrial automation component designed for distributed control applications. It supports 12 VDC local bus power at 75 mA and 24 VDC bussed field power at 150 mA, with 24 VDC field circuit at 5 mA per channel. The controller operates in ambient temperatures from -40°C to +70°C and supports industrial vibration and shock tolerance ratings.

Allen-Bradley 1771-P2 power supply module provides regulated 5V DC backplane power for PLC-5 systems using 1771 Universal I/O chassis, supporting reliable chassis operation with onboard power indication.

Allen-Bradley 1769-IA8I Compact I/O module delivers eight individually isolated 100–120 VAC discrete inputs for CompactLogix systems, enabling reliable AC signal monitoring in industrial control applications.

Allen-Bradley 1794-TB3 FLEX I/O terminal base provides 16 I/O wiring points with screw-clamp connections, integrated FLEXBUS backplane support, and DIN-rail mounting for FLEX I/O systems.