Search results for: 'ins'

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

Allen-Bradley 1746-IA16-SERC Series C AC input module provides reliable 16-point 120VAC signal monitoring for SLC 500 systems, with isolation and LED status.

Modicon AS-BDEP-210 115 VAC 8-channel input module with 1.8 kV isolation for 800 Series I/O and 984 PLC racks. Provides reliable ON/OFF detection from 80–132 VAC with fast 10 ms response for stable discrete monitoring in legacy Modicon systems.

Siemens TM-E15C24-01 terminal module for ET 200S provides secure spring wiring, supports pre-wiring, and pairs with all 15mm ET 200S electronic modules.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Westinghouse 1C31234G31 Ovation Contact Input Module delivers 16-channel discrete signal monitoring for Ovation DCS architectures, supporting contact status acquisition for plant control, interlocks, and process visibility.

Omron CJ1W-PD025 PLC power supply unit brings 24 VDC input power to CJ-series control racks with 5.0 A at 5 VDC, 0.8 A at 24 VDC, and 25 W capacity for modular automation systems.

The Emerson KJ2005X1-BK1 SX Controller is designed for use within the DeltaV™ S-Series Digital Automation System. It supports hazardous area installations with ATEX, IECEx, FM, and Class I Div 2 approvals. The unit operates on +5 VDC local bus power and is specified for industrial environments from –40°C to +60°C.

Allen-Bradley 1771-RTP1 remote termination panel for PLC-5 systems simplifies analog field wiring, supports 1771-N modules, and enables cold-junction compensation for precise thermocouple measurements.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

Allen-Bradley 1771-IAD digital input module delivers 16 channels of 120V AC/DC signal monitoring for PLC-5 systems, enabling reliable connection of switches, relays, and discrete field devices.

Phoenix Contact PLC-BSC-24UC/21-21 relay base for 24V AC/DC PLC relays, with LED status display and DIN rail mounting, ideal for automation control systems.

Allen-Bradley 1769-OW8I Compact I/O relay output module with eight individually isolated AC/DC outputs for CompactLogix and MicroLogix 1500 systems, supporting mixed-voltage industrial load control.

Allen-Bradley 1771-OW16-B is a 16-channel PLC-5 relay output module supporting 24–250VAC and 24–150VDC loads, delivering isolated electromechanical switching for industrial control applications.

Allen-Bradley 1769-IA8I Compact I/O module delivers eight individually isolated 100–120 VAC discrete inputs for CompactLogix systems, enabling reliable AC signal monitoring in industrial control applications.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Phoenix Contact RAD-ISM-900-XD-BUS is an OMNEX industrial wireless transceiver module operating in the 900 MHz ISM band. It supports bidirectional wireless transmission of digital and analog I/O signals and mounts on a DIN rail with an integrated bus foot for I/O expansion.

Metso Automation PDP406 Distributed Processing Unit for MAX DCS delivers real-time control, alarming, and data processing for industrial automation systems requiring reliable distributed architecture.

Yamatake-Honeywell J-DIM00 is a DC 24V digital input module for AMC automation systems, enabling reliable field signal monitoring and seamless integration with compatible industrial and marine control platforms.