Search results for: 'application in'

The Gould Modicon B803 is a discrete input PLC module for Modicon 800 Series controller platforms. It provides eight isolated 115 VAC input points used to translate field-level ON/OFF signals into logic states readable by the PLC CPU in industrial automation systems.

Honeywell 511-96019-101 Process Network Interface Module enables reliable communication within Honeywell TDC 3000 and Experion PKS distributed control systems, supporting Process Manager I/O network integration.

AEG 029.044.297 PLC Control Module PC Board designed for integration within AEG programmable logic controller systems, providing internal control functionality in modular industrial automation environments.

The Modicon AS-B875-002 is an 8-channel analog input module designed for use with Modicon 984 programmable controllers. It accepts either 1–5 V or 4–20 mA input signals and converts field analog signals into digital data for PLC processing.

The Allen-Bradley 1734-TBS is a POINT I/O terminal base assembly with an 8-position spring-clamp removable terminal block. Designed for compact distributed I/O systems, it supports DIN-rail mounting, removable wiring, and compatibility with multiple POINT I/O modules.

Emerson Phoenix Contact 1X00102H01 is an Ovation DCS power distribution module that delivers protected 5V, 12V, and 24V DC power to controller and I/O modules with diagnostic support.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Phoenix Contact RAD-ISM-900-XD-BUS is an OMNEX industrial wireless transceiver module operating in the 900 MHz ISM band. It supports bidirectional wireless transmission of digital and analog I/O signals and mounts on a DIN rail with an integrated bus foot for I/O expansion.

Metso Automation PDP406 Distributed Processing Unit for MAX DCS delivers real-time control, alarming, and data processing for industrial automation systems requiring reliable distributed architecture.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.

Omron CJ1W-PD025 PLC power supply unit brings 24 VDC input power to CJ-series control racks with 5.0 A at 5 VDC, 0.8 A at 24 VDC, and 25 W capacity for modular automation systems.

Allen-Bradley 1771-RTP1 remote termination panel for PLC-5 systems simplifies analog field wiring, supports 1771-N modules, and enables cold-junction compensation for precise thermocouple measurements.

General Electric 36A352951 AC-A circuit board with tag 356X479TAG01, designed for industrial control systems requiring analog AC signal processing within GE automation and power control platforms.

Metso Automation IOP332 digital input module for Valmet control systems, designed to monitor 120V AC/DC binary field signals from industrial devices with reliable I/O processing and diagnostics.

Metso Automation PDP401 Distributed Processing Unit for the maxDNA DCS, delivering core data acquisition, control execution, and processing within rack-mounted Metso automation systems.

Metso Automation IOP351 is a relay output I/O interface module designed for Metso control systems, enabling reliable field device switching and control in industrial automation and process environments.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.