Search results for: '10$'

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

The Yamatake Honeywell J-MHM10 is an industrial system interface module used in distributed control and automation environments. Manufactured in Japan, it operates on DC 5V at 1.08A with optional DC 24V at 320mA support, and is designed for integration within industrial control systems.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

Sixnet SixTRAK ST-DI-024-16M delivers 16 high-density discrete inputs for 10-32 VDC local I/O expansion in SixTRAK systems, supporting compact panel layouts with input-to-ST-Bus isolation in a module-only configuration.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

The Allen-Bradley 1769-IQ16 is a Compact I/O 16-point, 24V DC digital input module for CompactLogix and MicroLogix 1500 systems. It supports sinking and sourcing inputs, provides LED status indication per point, and installs via DIN rail or panel mount.

Allen-Bradley 1771-IAD PLC-5 digital input module with 16 AC/DC inputs. Designed for 120V industrial signals, reliable discrete device monitoring, and seamless integration into 1771 I/O chassis.

Emerson Ovation 5X00070G03 high-speed analog input module delivers 8 isolated voltage channels, 14-bit conversion, and configurable 50/60 samples per second acquisition for Ovation DCS data capture.

Allen-Bradley 1771-WA Series B provides reliable 10-terminal wiring for PLC-5 1771 I/O modules, supporting easy module changes and high-intent PLC wiring applications.

Emerson Ovation 1C31132G01 is an analog output personality module designed for four-channel Ovation analog output subsystems, routing field signals for 0-5 V, 0-10 V, and 0-20 mA output configurations.

Allen-Bradley 1769-IF8 analog input module for CompactLogix systems, providing eight configurable voltage or current input channels for precise industrial signal monitoring and control.

Allen-Bradley 1771-IAD PLC-5 digital AC/DC input module with 16 channels and 120V category support. Designed for interfacing discrete field devices in 1771 I/O chassis. Reliable signal detection for industrial control systems.

The Westinghouse 5X00070G33 delivers precise multi-channel voltage signal acquisition for Ovation DCS environments, supporting ±5V and ±10V inputs with isolated channels and high-resolution data capture for reliable industrial monitoring.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.

Westinghouse Emerson 5X00241G01 Ovation Processor Module brings real-time Ovation DCS control, 64 MB memory, 24V DC operation, Ethernet/serial integration, redundancy support, and diagnostics into industrial automation workflows.

Allen-Bradley 1769-OW8I Compact I/O relay output module with eight individually isolated AC/DC outputs for CompactLogix and MicroLogix 1500 systems, supporting mixed-voltage industrial load control.

ProSoft MVI56E MNET provides reliable Modbus TCP/IP client/server communication for ControlLogix systems, enabling seamless integration with Modbus devices.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

Allen-Bradley 1771-IAD digital input module delivers 16 channels of 120V AC/DC signal monitoring for PLC-5 systems, enabling reliable connection of switches, relays, and discrete field devices.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.