Search results for: 'ikea for'

Certified pre-owned Megger MIT1025: 10 kV insulation resistance tester designed for high-voltage equipment diagnostics. It delivers fast, stable readings up to 20 TΩ, supports PI/DAR testing, and includes advanced filtering for noisy environments—ideal for substations, motors, cables, and transformers.

AEMC C.A 6116N Installation Tester: Complete compliance testing with continuity, insulation, RCDs, loop, earth, power, harmonics & DataView® software.

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.

AEMC MiniFlex® MA194-24-BK — Flexible Waterproof Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series. Replaces Cat #2140.78.

AEMC AmpFlex 193-24-BK sensor measures current safely up to 12,000AAC with a flexible design that's compatible with Models 3945, 8220, 8230, and PEL Series products.

AEMC MN193-BK AC Current Probe: Dual range 5A/100A, measures from 5mA to 120A, 10ft lead—designed for PowerPad, PEL Series, L104 & L56 applications.

AEMC C.A 6116N Multi-Function Tester Kit: Verify electrical installations with precision—includes DataView®, clamp, and all-in-one compliance testing.

Westinghouse 9966D75G01 IQ Data Plus II power monitoring display delivers three-phase electrical measurement including amps, volts, watts, power factor, and energy data for digital metering systems.

AEMC MiniFlex® MA193-14-BK — Flexible Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series, Includes a 2.75” clamp

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

AEMC AmpFlex 196A-24-BK waterproof IP67 sensor measures up to 10,000AAC. Compatible with Models 8435, 8436, PEL 105 & 115.

Fluke FLK-SMFT-1000/KIT PV analyzer and tester with I-V curve tracing, Auto Test Mode, IEC 62446-1 safety and performance checks for C&I solar systems.

Fluke 1748/B/EUS Power Quality Logger: Advanced three-phase logging with IEC Class A accuracy, capturing voltage, current, harmonics and events for precise energy diagnostics.

Fluke 113 multimeter offers fast low-impedance VCHEK testing with AC/DC voltage detection, continuity checks, a bright backlit display, and CAT IV 600 V safety rating.

Fluke SMFT-1000 PRO delivers complete PV safety and performance testing with I-V curve tracing, irradiance measurement, and IEC 62446-1 compliance.

Fluke 114 digital multimeter with backlight offers True RMS accuracy, AutoVolt detection, and LoZ mode for reliable go/no-go troubleshooting.

Fluke 1746/30/EUS logs key power parameters with IEC Class A accuracy, 3000A iFlex probes, and multi-session recording for energy and power quality analysis.

Amprobe ACD-10 PLUS clamp meter measures AC/DC voltage to 600V, AC current to 600A, with thin jaws for tight spaces and auto-ranging convenience.

The Fluke LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit combines the LinkIQ Cable+Network Tester, IntelliTone Pro 200 probe, and Fluke 87V Industrial Multimeter in a single field-ready solution. It qualifies copper cabling up to 10GBASE-T using frequency-based measurements, performs switch and Ping diagnostics, and validates PoE negotiation and load delivery. The integrated multimeter supports electrical troubleshooting across industrial environments.

AEMC MH60 AC DC Current Probe: Portable 100A current probe with BNC output, 1MHz bandwidth, rechargeable battery, perfect for any oscilloscope.

The Fluke 376 FC is a high-capacity wireless clamp meter offering True-RMS AC/DC current up to 1000 A, an included iFlex flexible current probe extending range to 2500 A, full voltage capability to 1000 V, and wireless data logging — built for heavy-duty industrial environments.

Megger DLRO10 digital microhmmeter provides 10A low-resistance testing from 0.1 μΩ to 2000 Ω with Kelvin accuracy, automatic forward/reverse current, inductive mode, P-Type twist probes, 3m hook leads, and hard case.

AEMC SR704 AC current probe with 1mA/A output, 1000A range, 52mm jaw, and 5 ft lead. Designed for DMMs, loggers, and harmonic meters with low phase shift.